Materials and care

Material

2-seat sofa-bed

Smoulder resistant lining/ Smoulder resistant lining:: Polyester wadding

Back frame:: Plywood, Polyurethane foam 20 kg/cu.m., Particleboard, Solid wood, Fibreboard

Front rail:: Plywood, Polyurethane foam 20 kg/cu.m., Particleboard

Seat cushion:: Highly resilient polyurethane foam (cold foam) 35 kg/cu.m., Polyurethane foam 30 kg/cu.m.

Pocket spring unit:: Steel

Back cushion:: 30% cut polyurethane foam/ 70% polyester fibres

Cover for 2-seat sofa-bed section

Fabric:: 100% polyester (min. 90% recycled)

Base fabric:: 100 % polyester (100% recycled)

Sofa-bed mechanism

Layer glued slats:: Layer-glued wood veneer, Adhesive resin as coating

Seat frame/ Seat frame:: Steel, Epoxy/polyester powder coating

Foam mattress

Ticking/ Ticking:: 100 % polyester (100% recycled)

Filling:: 100 % polyester

Ticking, underside:: 100% polypropylene

Comfort filling:: Polyurethane foam 28 kg/cu.m.

Safety and compliance

The cover has a lightfastness level of 5 (the ability to resist colour fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.This cover’s ability to resist abrasion has been tested to handle 50,000 cycles. 15,000 cycles or more is suitable for furniture used every day at home. Over 30,000 cycles means a good ability to resist abrasion.This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 110 kg.This mattress has been tested and meets the requirements for durability set forth by standard EN 1957, and flammability requirements set forth by CAN/CGSB-4.2 No. 27.7.This seating furniture is for domestic/home use and is tested according to EN 12520.

Assembly and documents