KÄTTIL Chair, black/Knisa dark grey
How to get it
Checking availability...This high-back upholstered chair makes moments around the table comfier. To make life simpler, the washable cover comes in one piece and has hook-and-loop straps, so it’s easy to remove and put on again.
- Solid wood
- Tested for: 110 kg
- Washable cover
Material
- Smoulder resistant lining:
- Polyester wadding
- Cover/ Lining/ Fabric:
- 100% polyester (min. 90% recycled)
- Leg:
- Solid wood, Stain, Clear lacquer
- Seat:
- Solid wood, Fibreboard, Highly resilient polyurethane foam (cold foam) 35 kg/cu.m., Polyester wadding
- Backrest:
- Solid wood, Polyurethane foam 35 kg/cu.m., Polyester wadding
Care
FrameFor increased stability, re-tighten the screws about two weeks after assembly and when necessary.
CoverMachine wash, max 40°C, normal process.
Do not bleach.
Do not tumble dry.
Iron, max 150°C.
Do not dryclean.
Assembly instructions
KÄTTIL Chair805.003.48
The seat and high back are padded with foam and dressed in a durable, yet soft and smooth fabric cover to make your time around the table comfy and enjoyable, so you can stay a while longer.
After lively meals, it's nice to know that you can easily pull the chair cover off and machine wash it.
The chair cover comes in one piece and fixes in place with hook-and-loop fasteners so you can easily pull it off and put it back on again.
With regular airing or washing, you keep your cover fresh and clean, and also reduce the amount of dust and dirt in your living space.
Only recommended for indoor use.
Possible to separate for recycling or energy recovery if available in your community.
Material
- Smoulder resistant lining:
- Polyester wadding
- Cover/ Lining/ Fabric:
- 100% polyester (min. 90% recycled)
- Leg:
- Solid wood, Stain, Clear lacquer
- Seat:
- Solid wood, Fibreboard, Highly resilient polyurethane foam (cold foam) 35 kg/cu.m., Polyester wadding
- Backrest:
- Solid wood, Polyurethane foam 35 kg/cu.m., Polyester wadding
Care
FrameFor increased stability, re-tighten the screws about two weeks after assembly and when necessary.
CoverMachine wash, max 40°C, normal process.
Do not bleach.
Do not tumble dry.
Iron, max 150°C.
Do not dryclean.
- The cover has a lightfastness level of 5-6 (the ability to resist colour fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.This cover’s ability to resist abrasion has been tested to handle 40,000 cycles. 15,000 cycles or more is suitable for furniture used every day at home. Over 30,000 cycles means a good ability to resist abrasion.This seating furniture has been tested for home use and meets the requirements for durability and safety, set forth in the following standards: EN 12520 and EN 1022.
Assembly instructions
KÄTTIL Chair805.003.48

- 805.003.48
1 × KÄTTIL
Chair- Width: 46 cm
- Height: 19 cm
- Length: 90 cm
- Weight: 5.54 kg










