Product details
This 4-6 seat table in matte off-white and smooth, rounded corners is made to be your everyday favourite spot.
Stable construction with sturdy wooden legs and a lacquered, smooth melamine top that is both functional and easy to clean with a damp cloth.
The self-storing leaf is easy to insert to extend the table from 4 to 6 and just as easy to remove and tuck away under the table top when your guests have gone home.
The table legs are always in the corners of the table top even when the table is extended, so there is plenty of room for chairs under the table.
Bomstad chair cover offers a luxurious leather-look with double stitched seams for added strength and a decorative touch.
The chair cover comes in one piece and fixes in place with hook-and-loop fasteners so you can easily pull it off and put it back on again.
Generous, thick foam padding provides plush comfort during longer sittings.
Highly resilient foam backrest that gently adapts to your movements, providing support as you shift or adjust positions.
Solid wood legs with off-white finish, accented by powder-coated metal details at the top, awarding both style and stability.
Only recommended for indoor use.
Seats 4-6.
1 self-storing extension leaf included.
Combines with other products in the TONSTAD series.
A bit screwdriver is required to assemble this table, sold separately as a part of TRIXIG 15-piece toolset.
To prevent surface scratches, complete with TRIXIG stick-on floor protectors, sold separately.
Extra covers for TONSTAD chair are sold separately.
- Top panel:
- Particleboard, Acrylic paint, Melamine foil, Plastic edging
- Side rail/ Leg:
- Solid wood, Adhesive, Acrylic paint
- Cross rail:
- Particleboard, Plastic foil, Paper foil
- Coated fabric parts/ Coated fabric parts:
- 100% polyurethane, 75% polyester, 25% cotton
- Wadding:
- Polyester wadding
- Inner fabric:
- 100% polypropylene
- Thread:
- 100% polyester
- Hook and loop fastener:
- 100% nylon
- Back fabric/ Protective fabric:
- 100 % polyester (100% recycled)
- Smoulder resistant lining/ Lining:
- Polyester wadding
- Leg:
- Solid wood, Acrylic paint
- Sleeve/ Mounting plate/ Washer/ Fixing bracket:
- Steel, Epoxy/polyester powder coating
- Backrest:
- Plywood, Highly resilient polyurethane foam (cold foam) 35 kg/cu.m.
- Seat:
- Layer-glued wood veneer, Polyurethane foam 35 kg/cu.m.
- Hook and loop fastener:
- 100% nylon
Do not wash.
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dryclean.
Wipe dry with a clean cloth.
Protect from direct sunlight to prevent drying-out.
Vacuum clean.
Wipe dry with a clean cloth.
Light stains can be removed with textile cleaner or a sponge damped in water or a mild soapy solution.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
Wipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
This chair has been tested for home use and meets the requirements for durability and safety, set forth in the following standards: EN 12520 and EN 1022.This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 110 kg.
Measurements
- Table min. length: 140 cm
- Table max. length: 196 cm
- Table width: 85 cm
- Table height: 75 cm
- Chair width: 42 cm
- Chair depth: 56 cm
- Chair height: 86 cm
This product comes as 10 packages.
Extendable tableArticle number406.007.31This product has multiple packages.
- Width: 24 cm
- Height: 11 cm
- Length: 153 cm
- Weight: 16.75 kg
- Package(s): 1
- Width: 74 cm
- Height: 6 cm
- Length: 90 cm
- Weight: 21.56 kg
- Package(s): 1
Chair coverArticle number506.035.74- Width: 43 cm
- Height: 6 cm
- Length: 49 cm
- Weight: 0.82 kg
- Package(s): 4
Chair frameArticle number705.940.26- Width: 49 cm
- Height: 14 cm
- Length: 55 cm
- Weight: 7.97 kg
- Package(s): 4
