MATTRADITION Wall mounted extractor hood, stainless steel, 60 cm
Must be completed with
How to get it
5 year guarantee
This stainless steel hood with soft, rounded edges along with old-school rocker switches and knob, brings a traditional feel to the heart of your home. The LED light strip casts an even light over the hob.
Product details
5 year guarantee. Read about the terms in the guarantee brochure.
Can be installed in two ways: ducted to the outside or in recirculation mode fitted with charcoal filter.
LED light source included; effectively illuminates the cooking surface and provide energy saving.
You can easily remove and clean the grease filter in the dishwasher.
IKEA of Sweden
Measurements
- Width: 60.0 cm
- Depth: 45.8 cm
- Max. height recirculation: 114.2 cm
- Width of chimney: 21.0 cm
- Depth of chimney: 18.0 cm
- Weight: 11.00 kg
- Cord length: 130.0 cm
- Motor power: 210 W
Related products
Recommended for you
Quality
Sensitive to noise or have an open-plan home?
For extractor hoods, a noise level below 60 dB is considered low – roughly equivalent to a normal conversation between two people. We measure the noise level of our hoods at max speed, making it easier to compare different models. Note that sound levels decrease at lower speeds, and recirculating hoods are typically louder than those vented outdoors. Noise may also increase if the ducting is long or has several bends, as the air has to work harder to pass through the system.
Function solution
Sound levels
Sound levels for appliances are measured in decibels (dBs). Our extractor hoods have been tested in speed 3 to determine the dB level. The sound level of your extractor hood is affected by: • Type of installation. Exhaust-mode or recirculation-mode. • Length and diameter of the exhaust pipe between extractor and exhaust vent. The longer it is and the smaller the diameter, the louder it gets. • 90° bends. The more bends you have in the exhaust pipe, the greater the sound.