TONSTAD / TOSSBERG Table and 4 chairs, brown oak veneer/Gunnared dark grey black, 150x80 cm
Choose Chair:
How to get it
Checking availability...- Solid wood
- Wood veneer
Material
Table- Top panel:
- Particleboard, Tinted clear acrylic lacquer, Paper foil, Paper edging, Oak veneer, Stain, Tinted clear lacquer
- Side rail/ Leg:
- Solid wood, Adhesive, Oak veneer, Stain, Tinted clear acrylic lacquer
Chair- Frame:
- 100% polypropylene, Highly resilient polyurethane foam (cold foam) 60 kg/cu.m., Fibreboard, Steel
- Seat cushion:
- Highly resilient polyurethane foam (cold foam) 60 kg/cu.m.
- Leg:
- Steel, Polyethylene plastic, Epoxy/polyester powder coating
- Fabric:
- 100% polyester (min. 90% recycled)
Care
TableTable and 4 chairsWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
SeatChairVacuum clean.
Wipe clean with a damp cloth.
Advice and care instructions
TONSTAD Table405.999.40
Only recommended for indoor use.
Seats 4.
A bit screwdriver is required to assemble this table, sold separately as a part of TRIXIG 15-piece toolset.
To prevent surface scratches, complete with TRIXIG stick-on floor protectors, sold separately.
Material
Table- Top panel:
- Particleboard, Tinted clear acrylic lacquer, Paper foil, Paper edging, Oak veneer, Stain, Tinted clear lacquer
- Side rail/ Leg:
- Solid wood, Adhesive, Oak veneer, Stain, Tinted clear acrylic lacquer
Chair- Frame:
- 100% polypropylene, Highly resilient polyurethane foam (cold foam) 60 kg/cu.m., Fibreboard, Steel
- Seat cushion:
- Highly resilient polyurethane foam (cold foam) 60 kg/cu.m.
- Leg:
- Steel, Polyethylene plastic, Epoxy/polyester powder coating
- Fabric:
- 100% polyester (min. 90% recycled)
Care
TableTable and 4 chairsWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
SeatChairVacuum clean.
Wipe clean with a damp cloth.
- The cover has a lightfastness level of 5 (the ability to resist colour fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.This cover’s ability to resist abrasion has been tested to handle 50,000 cycles. 15,000 cycles or more is suitable for furniture used every day at home. Over 30,000 cycles means a good ability to resist abrasion.
Advice and care instructions
TONSTAD Table405.999.40
This product is made up of more than one component. You can find the details of these components below.
