Everyone faces each other around a round table and you can make room for socialising by simply adding a leaf. A traditional look with details like the turned leg gives it that little extra.
- Solid wood
Material
Extendable table- Table top/ Extension leaf:
- Particleboard, Plastic edging, Stain, Clear acrylic lacquer, Ash veneer
- Leg/ Side rail:
- Solid wood, Acrylic paint
- Cross rail:
- Solid birch, Clear acrylic lacquer
Chair- Frame:
- Solid pine, Stain
- Seat:
- Fibreboard, Highly resilient polyurethane foam (cold foam) 35 kg/cu.m.
- Backrest:
- Solid pine, Polyurethane foam 35 kg/cu.m.
- Cover/ Fabric:
- 100% polyester (min. 90% recycled)
Care
FrameChairWipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
Removable coverChairMachine wash, max 40°C, normal process.
Do not bleach.
Do not tumble dry.
Iron, max 150°C.
Do not dryclean.
Table and 4 chairsFor increased stability, re-tighten the screws about two weeks after assembly and when necessary.
TableTable and 4 chairsWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
Advice and care instructions
INGATORP Extendable table902.224.07

This 4-seat table can easily be extended into a 6-seat table using the included self-storing leaf.
The self-storing leaf is easy to insert to extend the table and just as easy to remove and tuck away under the table top when your guests have gone home.
Removable and washable seat cover makes this chair a good option for families with children.
Sturdy and durable solid wood chair frame.
Only recommended for indoor use.
Seats 4-6.
Product is possible to recycle or use for energy recovery, if available in your community.
May be completed with FIXA stick-on floor protectors; protect the underlying surface against wear.
Removable washable cover.
1 extension leaf included.
Material
Extendable table- Table top/ Extension leaf:
- Particleboard, Plastic edging, Stain, Clear acrylic lacquer, Ash veneer
- Leg/ Side rail:
- Solid wood, Acrylic paint
- Cross rail:
- Solid birch, Clear acrylic lacquer
Chair- Frame:
- Solid pine, Stain
- Seat:
- Fibreboard, Highly resilient polyurethane foam (cold foam) 35 kg/cu.m.
- Backrest:
- Solid pine, Polyurethane foam 35 kg/cu.m.
- Cover/ Fabric:
- 100% polyester (min. 90% recycled)
Care
FrameChairWipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
Removable coverChairMachine wash, max 40°C, normal process.
Do not bleach.
Do not tumble dry.
Iron, max 150°C.
Do not dryclean.
Table and 4 chairsFor increased stability, re-tighten the screws about two weeks after assembly and when necessary.
TableTable and 4 chairsWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
- This cover’s ability to resist abrasion has been tested to handle 40,000 cycles. 15,000 cycles or more is suitable for furniture used every day at home. Over 30,000 cycles means a good ability to resist abrasion.The cover has a lightfastness level of 5-6 (the ability to resist colour fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.
Advice and care instructions
INGATORP Extendable table902.224.07


This product is made up of more than one component. You can find the details of these components below.









