






TONSTAD / MÅRENÄS Table and 6 chairs, brown oak veneer/Gunnared beige black, 200x85 cm
How to get it
Checking availability...Collect 258 points with
It's OK to change your mind
- Solid wood
- Wood veneer
Material
Table- Top panel:
- Particleboard, Tinted clear acrylic lacquer, Paper foil, Paper edging, Oak veneer, Stain, Tinted clear lacquer
- Side rail/ Leg:
- Solid wood, Adhesive, Oak veneer, Stain, Tinted clear acrylic lacquer
Chair cover- Fabric:
- 100 % polyester
- Fabric:
- 100% polyester (min. 90% recycled)
Chair- Smoulder resistant lining/ Lining:
- Polyester wadding
- Leg:
- Solid wood, Adhesive, Stain, Clear lacquer
- Armrest frame/ Backrest frame:
- Solid wood, 100% recycled solid paperboard, Adhesive
- Comfort material:
- Polyurethane foam 35 kg/cu.m., Highly resilient polyurethane foam (cold foam) 35 kg/cu.m., Polyurethane foam 35 kg/cu.m.
- Seat frame:
- 100% polypropylene, Solid wood, Steel, Adhesive
- Hook and loop fastener:
- 100% nylon
- Comfort material:
- Polyurethane foam 35 kg/cu.m.
Care
Removable coverChair coverMachine wash, max 40°C, normal process.
Do not bleach.
Do not tumble dry.
Iron, max 150°C.
Professional dry cleaning in tetrachloroethene and hydrocarbons, normal process.
ChairDo not wash.
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dryclean.
Vacuum clean.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
TableWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
Advice & Care instructions
TONSTAD Table005.999.37
Only recommended for indoor use.
Seats 6.
Extra covers for MÅRENÄS chair with armrests are available in different colours, sold separately.
A bit screwdriver is required to assemble this table, sold separately as a part of TRIXIG 15-piece toolset.
To prevent surface scratches, complete with TRIXIG stick-on floor protectors, sold separately.
Removable washable cover.
IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Material
Table- Top panel:
- Particleboard, Tinted clear acrylic lacquer, Paper foil, Paper edging, Oak veneer, Stain, Tinted clear lacquer
- Side rail/ Leg:
- Solid wood, Adhesive, Oak veneer, Stain, Tinted clear acrylic lacquer
Chair cover- Fabric:
- 100 % polyester
- Fabric:
- 100% polyester (min. 90% recycled)
Chair- Smoulder resistant lining/ Lining:
- Polyester wadding
- Leg:
- Solid wood, Adhesive, Stain, Clear lacquer
- Armrest frame/ Backrest frame:
- Solid wood, 100% recycled solid paperboard, Adhesive
- Comfort material:
- Polyurethane foam 35 kg/cu.m., Highly resilient polyurethane foam (cold foam) 35 kg/cu.m., Polyurethane foam 35 kg/cu.m.
- Seat frame:
- 100% polypropylene, Solid wood, Steel, Adhesive
- Hook and loop fastener:
- 100% nylon
- Comfort material:
- Polyurethane foam 35 kg/cu.m.
Care
Removable coverChair coverMachine wash, max 40°C, normal process.
Do not bleach.
Do not tumble dry.
Iron, max 150°C.
Professional dry cleaning in tetrachloroethene and hydrocarbons, normal process.
ChairDo not wash.
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dryclean.
Vacuum clean.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
TableWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
- The cover has a lightfastness level of 5 (the ability to resist colour fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.This cover's ability to resist abrasion has been tested to handle 25,000 cycles. A cover that withstands 15,000 cycles or more is suitable for furniture that should withstand everyday use in the home.This seating furniture has been tested for home use and meets the requirements for durability and safety, set forth in the following standards: EN 12520 and EN 1022.
Advice & Care instructions
TONSTAD Table005.999.37


This product is made up of more than one component. You can find the details of these components below.













