BERGSHYTTAN / STOCKHOLM 2025 Table and 6 chairs, dark brown ash veneer/leather dark brown, 240x93 cm
Choose Chair:
How to get it
Checking availability...Collect 286 points with
It's OK to change your mind
This spacious wood veneer table, paired with 6 comfy STOCKHOLM chairs, brings everyone together for family feasts, parties and playtime – an ideal setting for making lasting memories.
- Wood veneer
Material
Table- Top panel:
- Particleboard, Fibreboard, Plywood, Honeycomb structure paper filling (min. 70% recycled), Ash veneer, Stain, Tinted clear lacquer, Ash veneer
- Rail:
- Particleboard, Ash veneer, Stain, Tinted clear lacquer, Paper edging
- Leg:
- Particleboard, Fibreboard, Honeycomb structure paper filling (min. 70% recycled), Ash veneer, Stain, Tinted clear lacquer, Ash veneer, Plastic edging
Chair- Leather:
- Through dyed full grain leather from cattle
- Smoulder resistant lining:
- Polyester wadding
- Frame:
- Solid oak, Adhesive, Clear acrylic lacquer
- Backrest:
- Layer-glued wood veneer, Oak veneer, Clear acrylic lacquer
- Seat:
- Fibreboard
- Bracket:
- Layer-glued wood veneer, Tinted clear lacquer
- Comfort material:
- Polyurethane foam 35 kg/cu.m.
- Backing:
- 100% polypropylene
- Stitching thread:
- 100 % polyester
Care
TableWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
For maximum quality, re-tighten the screws when necessary.
ChairProtect from direct sunlight to prevent drying-out.
Generous design with ample space for many.
Every table is unique with distinctive grain patterns and natural colour variations.
Scratch-resistant top of lacquered wood veneer.
Stands steady also on an uneven floor as it has adjustable feet.
Only recommended for indoor use.
IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Material
Table- Top panel:
- Particleboard, Fibreboard, Plywood, Honeycomb structure paper filling (min. 70% recycled), Ash veneer, Stain, Tinted clear lacquer, Ash veneer
- Rail:
- Particleboard, Ash veneer, Stain, Tinted clear lacquer, Paper edging
- Leg:
- Particleboard, Fibreboard, Honeycomb structure paper filling (min. 70% recycled), Ash veneer, Stain, Tinted clear lacquer, Ash veneer, Plastic edging
Chair- Leather:
- Through dyed full grain leather from cattle
- Smoulder resistant lining:
- Polyester wadding
- Frame:
- Solid oak, Adhesive, Clear acrylic lacquer
- Backrest:
- Layer-glued wood veneer, Oak veneer, Clear acrylic lacquer
- Seat:
- Fibreboard
- Bracket:
- Layer-glued wood veneer, Tinted clear lacquer
- Comfort material:
- Polyurethane foam 35 kg/cu.m.
- Backing:
- 100% polypropylene
- Stitching thread:
- 100 % polyester
Care
TableWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
For maximum quality, re-tighten the screws when necessary.
ChairProtect from direct sunlight to prevent drying-out.
- This table has been tested for general, non-domestic use and meets the requirements for safety, durability and stability set forth in the following standard: EN 15372 and ANSI/BIFMA X:5.5.This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 110 kg.This seating furniture has been tested for public use and meets the requirements for safety, durability and stability set forth in the following standards: EN 16139-Level 1 and ANSI/BIFMA x5.4.
This product is made up of more than one component. You can find the details of these components below.
