This integrated ceramic wash-basin with raised backsplash is designed for a perfect fit in our wash-stands. A flawless look with traditional appeal and space to place your toothbrush holder/soap dispenser.
10 year guarantee
Material
Wash-basin- Cover/ Spring:
- Stainless steel
- Cover cap/ Mechanism:
- Acetal plastic
- Sealing ring:
- Synthetic rubber
- Cover cap:
- Polycarbonate/ABS plastic
- Basematerial:
- Ceramics, Coloured glaze
Water trap w flexible pipe, 1 bowl- Water trap frame/ Cleaning plug/ Cover cap/ Outlet pipe/ Outlet connector:
- Polypropylene plastic
- Sealing ring/ Gasket/ Seal:
- Synthetic rubber
- Waste pipe:
- Synthetic rubber, Polypropylene plastic
- Strainer:
- Stainless steel
- Seals:
- Polyethylene foam
- Assembly tool:
- ABS plastic
Care
Wash-basinWipe clean with a soft cloth dampened in water and a mild non-abrasive washing-up detergent or soap, if necessary.
Do not use scouring powder, steel wool, hard or sharp tools which can scratch the surface of the washbasin.
Assembly instructions
RUTSJÖN Wash-basin205.454.01RÄNNILEN Water trap w flexible pipe, 1 bowl305.624.33
This integrated ceramic wash-basin fits perfectly into our wash-stands. The raised backsplash prevents splashes on the wall and combined with the oval bowl you get a warm, traditional expression.
Use the space on the wash-basin to place toothbrush holder and soap dispenser.
To enhance your style, pair with a mixer tap of your choice, sold separately.
10 year guarantee. Read about the terms in the guarantee brochure.
Comprises: 1 wash-basin and 1 water trap.
Chrome-finish wash-basin pop-up plug and overflow kit included.
Ceramic wash-basins are kiln-fired, which makes each one unique and the size may vary slightly from the measurements given.
Waste outlet pipe diameter: 32 mm (1 1/4") / 40 mm (1 5/8").
If you are uncertain about the installation, contact a professional. The installation shall be made in accordance with valid local building and plumbing regulations.
Wash-basin mixer taps from our range and from other manufacturers can be mounted on this wash-basin.
Fits HAVBÄCK, ÄNGSJÖN, TÄNNFORSEN and HEMNES wash-stands.
Silicone is needed for installation, not included.
Material
Wash-basin- Cover/ Spring:
- Stainless steel
- Cover cap/ Mechanism:
- Acetal plastic
- Sealing ring:
- Synthetic rubber
- Cover cap:
- Polycarbonate/ABS plastic
- Basematerial:
- Ceramics, Coloured glaze
Water trap w flexible pipe, 1 bowl- Water trap frame/ Cleaning plug/ Cover cap/ Outlet pipe/ Outlet connector:
- Polypropylene plastic
- Sealing ring/ Gasket/ Seal:
- Synthetic rubber
- Waste pipe:
- Synthetic rubber, Polypropylene plastic
- Strainer:
- Stainless steel
- Seals:
- Polyethylene foam
- Assembly tool:
- ABS plastic
Care
Wash-basinWipe clean with a soft cloth dampened in water and a mild non-abrasive washing-up detergent or soap, if necessary.
Do not use scouring powder, steel wool, hard or sharp tools which can scratch the surface of the washbasin.
- The washbasin is resistant to most chemicals, except for strong acids and strong alkalis.
Assembly instructions
RUTSJÖN Wash-basin205.454.01RÄNNILEN Water trap w flexible pipe, 1 bowl305.624.33
- 205.454.01
1 × RUTSJÖN
Wash-basin- Width: 53 cm
- Height: 23 cm
- Length: 86 cm
- Weight: 25.66 kg
305.624.331 × RÄNNILEN
Water trap w flexible pipe, 1 bowl- Width: 31 cm
- Height: 8 cm
- Length: 45 cm
- Weight: 0.50 kg
This product is made up of more than one component. You can find the details of these components below.
