How to get it
PLATSA series creates storage possibilities, even in the trickiest of places. The modular parts can be built high, low, under sloping ceilings or staircases, around a window or even along an entire wall.
Product details
It’s easy to adapt PLATSA storage combinations according to your needs by simply adding (or removing) frames, doors, interiors, exteriors, feet or suspension rails.
The frames are easy to install by just clicking them together, no tools are needed.
You can easily attach several PLATSA frames to each other using the included clips. They are easy to mount and remove without using tools, and you avoid visible screw holes on the outside.
The doors can be hung with the opening to the right or the left.
Adjustable feet make it possible to compensate any irregularities in the floor.
You can organise the inside with interiors from the HJÄLPA series – and for the exterior there are smart solutions in the LÄTTHET series.
With PLATSA home planner tool, you can easily create a solution that is adapted to you, your home and your storage needs.
Good to know
Depending on how you build your PLATSA combination, you may need an additional SPILDRA top for storage and an additional set of LÄTTHET legs. Sold separately.
Two persons are needed for the assembly of this furniture.
Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home, sold separately.
Interior accessories that help you organise inside your wardrobe are sold separately.
Knobs and handles are sold separately.
Materials and care
Material
Fibreboard, Paper foil, Particleboard, Honeycomb structure paper filling (100% recycled)
Particleboard, Paper foil
- Basematerial:
- Steel, Epoxy/polyester powder coating
- Wheel:
- Acetal plastic
- Drawer bottom:
- Fibreboard, Plastic foil
Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Paper foil, Plastic edging
- Hinge:
- Steel, Copper-plated
- Soft closing device:
- Acetal plastic
- Rail:
- Steel, Galvanized
- Cover cap:
- Polypropylene plastic
Steel, Polypropylene plastic, Galvanized
Care
Wipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
Safety and compliance
Assembly and documents
Assembly instructions
PLATSA Frame903.309.54PLATSA Frame503.309.70HJÄLPA Drawer without front603.309.84HJÄLPA Shelf003.311.61HJÄLPA Soft closing hinge903.828.82LÄTTHET Suspension rail003.863.75LÄTTHET Leg, adjustable203.311.98Advice and care instructions
PLATSA Frame903.309.54PLATSA Frame503.309.70FONNES Door403.310.60FONNES Drawer front803.859.23Measurements
- Width: 300 cm
- Depth: 42 cm
- Height: 241 cm
Package details
This product comes as 53 packages.
PLATSA
Article number903.309.54- Width: 41 cm
- Height: 7 cm
- Length: 187 cm
- Weight: 17.20 kg
- Package(s): 2
PLATSA
Article number503.309.70- Width: 41 cm
- Height: 9 cm
- Length: 67 cm
- Weight: 8.00 kg
- Package(s): 5
FONNES
Article number403.310.60- Width: 60 cm
- Height: 2 cm
- Length: 69 cm
- Weight: 4.88 kg
- Package(s): 7
FONNES
Article number803.859.23- Width: 20 cm
- Height: 2 cm
- Length: 68 cm
- Weight: 1.57 kg
- Package(s): 6
HJÄLPA
Article number603.309.84- Width: 41 cm
- Height: 5 cm
- Length: 61 cm
- Weight: 2.73 kg
- Package(s): 6
HJÄLPA
Article number003.311.61- Width: 40 cm
- Height: 2 cm
- Length: 59 cm
- Weight: 1.58 kg
- Package(s): 8
HJÄLPA
Article number903.828.82- Width: 17 cm
- Height: 3 cm
- Length: 17 cm
- Weight: 0.11 kg
- Package(s): 14
LÄTTHET
Article number003.863.75- Width: 5 cm
- Height: 3 cm
- Length: 66 cm
- Weight: 0.61 kg
- Package(s): 3
LÄTTHET
Article number203.311.98- Width: 18 cm
- Height: 3 cm
- Length: 24 cm
- Weight: 0.20 kg
- Package(s): 2