FREDDE / MATCHSPEL Gaming desk and chair, black
How to get it
Checking availability...Hang the small shelves inside or outside the side panels, depending on your needs.
Material
Gaming desk- Frame/ Support:
- Steel, Epoxy/polyester powder coating
- Table top:
- Particleboard, Melamine foil, Plastic edging
- Pocket:
- Plastic edging
- Back panel:
- Particleboard, Melamine foil, Paper foil
- Side panel/ Shelf:
- Particleboard, Melamine foil, Plastic edging, Paper foil
Gaming chair- Back frame/ Back bar:
- Steel, Epoxy/polyester powder coating
- Seat frame:
- Layer-glued wood veneer
- Seat foam:
- Polyurethane foam 25 kg/cu.m., Polyurethane foam 35 kg/cu.m.
- Headrest:
- Reinforced polypropylene plastic
- Mesh:
- 100 % polyester
- Star base:
- Aluminium, Epoxy/polyester powder coating
- Seat cover:
- 52% polyester, 30% polyurethane, 18% cotton
- Wadding:
- Polyester wadding
- Coated fabric:
- 100% polyurethane, 75% polyester, 25% cotton
- Fabric:
- 100% polyester (min. 90% recycled)
- Coated fabric parts:
- 100% polyurethane, 75% polyester, 25% cotton
Care
Gaming deskWipe clean with a damp cloth.
Check regularly that all assembly fastenings are properly tightened and retighten when necessary.
Advice and care instructions
FREDDE Gaming desk502.190.44MATCHSPEL Gaming chair805.076.08MATCHSPEL Gaming chair805.076.08

Keep your coffee, beverage or snacks nearby in the cut-out cup holders on either side of the table top. The cup holders are made of plastic that is approved for use with food.
You can fit a 32" computer monitor or TV by removing the shelf above the table top.
The high side panels help block sunlight and prevent distracting glare on your computer monitor.
The adjustable and lockable tilt function increases stability and control in different sitting positions.
May be completed with SIGNUM cable trunking to keep all cords in place.
Holds up to two 24" flat screens.
Material
Gaming desk- Frame/ Support:
- Steel, Epoxy/polyester powder coating
- Table top:
- Particleboard, Melamine foil, Plastic edging
- Pocket:
- Plastic edging
- Back panel:
- Particleboard, Melamine foil, Paper foil
- Side panel/ Shelf:
- Particleboard, Melamine foil, Plastic edging, Paper foil
Gaming chair- Back frame/ Back bar:
- Steel, Epoxy/polyester powder coating
- Seat frame:
- Layer-glued wood veneer
- Seat foam:
- Polyurethane foam 25 kg/cu.m., Polyurethane foam 35 kg/cu.m.
- Headrest:
- Reinforced polypropylene plastic
- Mesh:
- 100 % polyester
- Star base:
- Aluminium, Epoxy/polyester powder coating
- Seat cover:
- 52% polyester, 30% polyurethane, 18% cotton
- Wadding:
- Polyester wadding
- Coated fabric:
- 100% polyurethane, 75% polyester, 25% cotton
- Fabric:
- 100% polyester (min. 90% recycled)
- Coated fabric parts:
- 100% polyurethane, 75% polyester, 25% cotton
Care
Gaming deskWipe clean with a damp cloth.
Check regularly that all assembly fastenings are properly tightened and retighten when necessary.
- Measure the depth and width of your stationary computer. The measurements should be less than those of the shelf.
Advice and care instructions
FREDDE Gaming desk502.190.44MATCHSPEL Gaming chair805.076.08MATCHSPEL Gaming chair805.076.08

This product is made up of more than one component. You can find the details of these components below.












