TRAVSPORT / MARKUS Desk and chair, electric black/dark grey
How to get it
Material
Table topParticleboard, Melamine foil, Plastic edging, Plastic edging
Underframe sit/stand f table tp, el- Leg/ Inside leg/ Midbeam/ Bracket/ Foot/ Support:
- Steel, Epoxy/polyester powder coating
- Connection pipe/ Mounting plate:
- Acetal plastic
- Control panel:
- Polycarbonate/ABS plastic
- Adapter:
- Polycarbonate plastic
- Spindle:
- Reinforced polyester, Acetal plastic
- Shaft:
- Steel
- Sleeve:
- Aluminium
- Felt pads:
- Mixed fibres
- Cable management:
- Felt
Office chair- Back frame/ Armrest frame:
- Steel, Epoxy/polyester powder coating
- Armrest pad:
- Polypropylene plastic, Synthetic rubber
- Foam:
- Polyurethane foam 35 kg/cu.m.
- Seat frame:
- Layer-glued wood veneer
- Star base:
- Aluminium
- Back fabric:
- 100 % polyester
- Fabric:
- 100% polyester (min. 90% recycled)
Care
Fixed coverDesk and chairLight stains can be removed with a sponge damped in water or a mild soapy solution.
Fixed coverOffice chairLight stains can be removed with textile cleaner or a sponge damped in water or a mild soapy solution.
FrameOffice chairWipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
Underframe sit/stand f table tp, elWipe clean with a damp cloth.
Wipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
Check regularly that all assembly fastenings are properly tightened and retighten when necessary.
For increased stability, re-tighten the screws when necessary.
Manual tilt tension.
Tilt mechanism.
Synchronised tilt mechanism.
Tilt lock.
Lumbar support.
Adjustable seat height.
May be completed with KOLON floor protector.
Material
Table topParticleboard, Melamine foil, Plastic edging, Plastic edging
Underframe sit/stand f table tp, el- Leg/ Inside leg/ Midbeam/ Bracket/ Foot/ Support:
- Steel, Epoxy/polyester powder coating
- Connection pipe/ Mounting plate:
- Acetal plastic
- Control panel:
- Polycarbonate/ABS plastic
- Adapter:
- Polycarbonate plastic
- Spindle:
- Reinforced polyester, Acetal plastic
- Shaft:
- Steel
- Sleeve:
- Aluminium
- Felt pads:
- Mixed fibres
- Cable management:
- Felt
Office chair- Back frame/ Armrest frame:
- Steel, Epoxy/polyester powder coating
- Armrest pad:
- Polypropylene plastic, Synthetic rubber
- Foam:
- Polyurethane foam 35 kg/cu.m.
- Seat frame:
- Layer-glued wood veneer
- Star base:
- Aluminium
- Back fabric:
- 100 % polyester
- Fabric:
- 100% polyester (min. 90% recycled)
Care
Fixed coverDesk and chairLight stains can be removed with a sponge damped in water or a mild soapy solution.
Fixed coverOffice chairLight stains can be removed with textile cleaner or a sponge damped in water or a mild soapy solution.
FrameOffice chairWipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
Underframe sit/stand f table tp, elWipe clean with a damp cloth.
Wipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
Check regularly that all assembly fastenings are properly tightened and retighten when necessary.
For increased stability, re-tighten the screws when necessary.
- This desk has been developed and tested for office use and meets the requirements for safety, durability and stability set forth in the following standard: EN 527-2.This desk has been developed and tested for home office use and occasional use and meets the requirements for safety, durability and stability set forth in the following standard: ANSI/BIFMA X6.5.
- Max. load80 kg
- Width120 cm
- Depth70 cm
- Max. height126 cm
- Min. height62 cm
This product is made up of more than one component. You can find the details of these components below.
