STOCKHOLM 2025 / SKANSNÄS Table and 6 chairs, oak veneer/black beech, 230x90 cm
Choose Chair:
How to get it
Checking availability...Related products
The seat is made of handwoven paper cord, a naturally cool, comfortable and resistant material, used for years in furniture making.
- Solid wood
- Wood veneer
Material
Table topParticleboard, Layer-glued wood veneer, Honeycomb structure paper filling (100% recycled), Oak veneer, Oak veneer, Clear acrylic lacquer, Oak veneer, Clear acrylic lacquer, Fibreboard, Oak veneer, Clear acrylic lacquer
LegSolid wood, Oak veneer, Clear acrylic lacquer
Chair- Side frame/ Cross rail:
- Solid beech, Adhesive, Stain, Tinted clear lacquer
- Seat:
- Steel, Paper, Epoxy/polyester powder coating, Clear lacquer
- Backrest:
- Layer-glued wood veneer, Beech veneer, Stain, Tinted clear lacquer
Care
ChairWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
If placed close to a radiator or other source of heat, the material can dry out and deteriorate.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
Table top/legWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
Advice and care instructions
STOCKHOLM 2025 Table top105.901.25
Only recommended for indoor use.
Paper cord is a naturally resistant material that can last for many years. The seat is available as a spare part and can be replaced if needed.
A bit screwdriver is required to assemble this chair, sold separately as a part of TRIXIG 15-piece toolset.
To prevent surface scratches, complete with TRIXIG stick-on floor protectors, sold separately.
Material
Table topParticleboard, Layer-glued wood veneer, Honeycomb structure paper filling (100% recycled), Oak veneer, Oak veneer, Clear acrylic lacquer, Oak veneer, Clear acrylic lacquer, Fibreboard, Oak veneer, Clear acrylic lacquer
LegSolid wood, Oak veneer, Clear acrylic lacquer
Chair- Side frame/ Cross rail:
- Solid beech, Adhesive, Stain, Tinted clear lacquer
- Seat:
- Steel, Paper, Epoxy/polyester powder coating, Clear lacquer
- Backrest:
- Layer-glued wood veneer, Beech veneer, Stain, Tinted clear lacquer
Care
ChairWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
If placed close to a radiator or other source of heat, the material can dry out and deteriorate.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
Table top/legWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
- This table has been tested for general, non-domestic use and meets the requirements for safety, durability and stability set forth in the following standard: EN 15372 and ANSI/BIFMA X:5.5.This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 110 kg.This seating furniture has been tested for public use and meets the requirements for safety, durability and stability set forth in the following standards: EN 16139-Level 1.
Advice and care instructions
STOCKHOLM 2025 Table top105.901.25
This product is made up of more than one component. You can find the details of these components below.
