PLATSA Wardrobe with 5 doors+3 drawers, white/Fonnes white, 240x42x241 cm
How to get it
Checking availability...Collect 94 points with
It's OK to change your mind
The PLATSA series has storage solutions for even the trickiest spaces. You can build high or low. Under a sloping ceiling or along an entire wall. Finish with doors and interior organisers as needed.
Material
FrameFibreboard, Paper foil, Particleboard, Honeycomb structure paper filling (100% recycled)
Door/ drawer frontParticleboard, Paper foil
Drawer without front- Basematerial:
- Steel, Epoxy/polyester powder coating
- Wheel:
- Acetal plastic
- Drawer bottom:
- Fibreboard, Plastic foil
Soft closing hinge- Hinge:
- Steel, Copper-plated
- Soft closing device:
- Acetal plastic
ShelfParticle- and fibreboard with honeycomb paper filling (100% recycled paper), Paper foil, Plastic edging
Suspension rail- Rail:
- Steel, Galvanized
- Cover cap:
- Polypropylene plastic
Leg, adjustableSteel, Polypropylene plastic, Galvanized
Care
Frame/leg, adjustable/door/drawer front/drawer without front/shelf/suspension railWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
Assembly instructions
PLATSA Frame903.309.54PLATSA Frame503.309.70HJÄLPA Drawer without front603.309.84HJÄLPA Soft closing hinge903.828.82HJÄLPA Shelf003.311.61LÄTTHET Suspension rail003.863.75LÄTTHET Leg, adjustable203.311.98
You can maximise your storage space by creating a storage solution that bridges over your bed, desk or seating.
Perfect where space is limited since the frame is narrow.
You can easily attach several PLATSA frames to each other using the included clips. They are easy to mount and remove without using tools, and you avoid visible screw holes on the outside.
You can organise the inside with interiors from the HJÄLPA series – and for the exterior there are smart solutions in the LÄTTHET series.
Depending on how you build your PLATSA combination, you may need an additional SPILDRA top for storage and an additional set of LÄTTHET legs. Sold separately.
Two persons are needed for the assembly of this furniture.
Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home, sold separately.
Knobs and handles are sold separately.
Interior accessories that help you organise inside your wardrobe are sold separately.
IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Material
FrameFibreboard, Paper foil, Particleboard, Honeycomb structure paper filling (100% recycled)
Door/ drawer frontParticleboard, Paper foil
Drawer without front- Basematerial:
- Steel, Epoxy/polyester powder coating
- Wheel:
- Acetal plastic
- Drawer bottom:
- Fibreboard, Plastic foil
Soft closing hinge- Hinge:
- Steel, Copper-plated
- Soft closing device:
- Acetal plastic
ShelfParticle- and fibreboard with honeycomb paper filling (100% recycled paper), Paper foil, Plastic edging
Suspension rail- Rail:
- Steel, Galvanized
- Cover cap:
- Polypropylene plastic
Leg, adjustableSteel, Polypropylene plastic, Galvanized
Care
Frame/leg, adjustable/door/drawer front/drawer without front/shelf/suspension railWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
- This furniture must be fixed to the wall with the enclosed wall fastener.WARNING! Tipping hazard – this product must be securely anchored. Use suitable screws and plugs for your home. If you are uncertain, seek professional advice.
Assembly instructions
PLATSA Frame903.309.54PLATSA Frame503.309.70HJÄLPA Drawer without front603.309.84HJÄLPA Soft closing hinge903.828.82HJÄLPA Shelf003.311.61LÄTTHET Suspension rail003.863.75LÄTTHET Leg, adjustable203.311.98
This product is made up of more than one component. You can find the details of these components below.
