Skip to main content

OPPEJEN Bathtub door, glass, 92x143 cm

€ 150

How to get it

Product features
  • 10 year guarantee

Transform your bath into a shower bath and prevent water from splashing onto the floor. The clear, tempered safety glass creates an open and spacious feeling in your bathroom.

Article Number504.313.61

Product details

10 year guarantee. Read about the terms in the guarantee brochure.

The tempered safety glass is durable and impact-resistant. If broken, it will shatter into small chunks that are less likely to cause injury than shattered plate glass.

Suitable for use at home and in public places such as hotels.

Designer

Henrik Preutz

Article Number504.313.61

Good to know

6 mm thick tempered glass.

For use with a bathtub.

You can choose to mount the door on the right or left side.

Possible to adjust to fit uneven walls.

The door can opened inwards or outwards.

If you are uncertain about the installation, contact a professional. The installation shall be made in accordance with valid local building and plumbing regulations.

IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com

Materials and care

Material

Door frame:
Aluminium (min. 70% recycled), Anodized
Glass:
Tempered glass
Bracket:
Zinc, Polyester powder coating

Care

Remove limescale stains using a small amount of lime-dissolving solution, e.g. vinegar or lemon juice.Then clean again with a damp cloth.

Safety and compliance

Handle with care! A damaged edge or scratched surface can cause the glass to suddenly crack and/or break. Avoid collisions from the side - this is where the glass is most vulnerable.This product bears the CE mark.

Assembly and documents

Assembly instructions

OPPEJEN Bathtub door504.313.61

Weight & measurements

  • Width: 92 cm
  • Height: 143 cm

Package details

OPPEJEN

Article Number504.313.61
  • Width: 102 cm
  • Height: 10 cm
  • Length: 156 cm
  • Weight: 24.00 kg
  • Package(s): 1

Reviews

Bath seal issueAnonymous reviewerThe bath seal provided with this door needs to be bigger. 28mm would be a good size then this can be cut back as needed2
Inherent design flaw - should be withdrawn from saleLiamThis item has an inherent design flaw that means that it is impossible to form a proper seal between the bottom edge of the glass panel and the edge of the bath. The (non-adjustable) gap between the bottom edge of the glass panel and the bottom of the pre-installed hinge on which the panel pivots is 18mm, the same as the height of the flexible part of the seal that you attach to the bottom of the screen! The seal height should be a good bit taller than 18mm to form a proper seal or the gap between the bottom of the glass panel and bottom of the pre-installed hinge should be significantly reduced, ideally the latter, as a very tall seal looks unsightly. This item should be withdrawn from sale as it is not fit for purpose.1

Customer reviews

1.5Average rating
2Reviews

Related products

Recommended for you

Get the look

Ideas based on your recently viewed products

More from the

Accessories for OPPEJEN