Can I get anything to cover the pre-drilled holes on the inside panels of a cabinet?
Yes, we sell cover caps that can fit the 5mm holes on the side panels of cabinets.
The VARIERA cover caps have been designed with our METOD kitchen range in mind, and are available to match the white and black cabinets. They are suitable for 5mm holes, which means they are also compatible with PAX wardrobe frames.
The KOMPLEMENT cover caps are designed for PAX to suit the dark grey and grey-beige wardrobe range.
However, they will not be compatible with the following ranges, but we've provided the diameters so you can hopefully find cover caps that might fit from an alternative supplier: BILLY (3.5mm), PLATSA (3.5mm), BESTA (3mm).
Did you find this useful?
Thank you for your feedback!
What particular parts of our answer do you find unsatisfactory or unhelpful?
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
The text is confusing to understand
The text is not relevant to my question
The text is relevant but not helpful
The text is too long or too short
Thank you for your feedback!
Was the article not helpful? Try one of the related articles below.
PAX doors with hinges are not pre-drilled, so you can choose which knobs and handles to use and where to place it on the door.
Read moreWe don't pre-drill holes in our storage solution system doors for handles so that you have the freedom to use whichever handles you wish.
Read moreAny modifications you do to a product, such as drilling holes or removing parts during use, will void the warranty.
Read moreYou can use the METOD assembly kit for kitchen island to attach cover panels to the rear of your kitchen island.
Read moreProtective film is used to cover the panels to protect it from scratches during transport and assembly. You can simply peel this off when required.
Read moreA suspension rail is required for an EKET cabinet if you wish to attach it to the wall. If you plan to have the cabinet freestanding, a suspension rail isn't required.
Read more