RENFJÄLLET Pocket spring mattress base, incl leg and headboard firm/Tibbleby beige/grey, 160x200 cm
Complete with
How to get it
Checking availability...Collect 127 points with
It's OK to change your mind
We like how the pocket springs respond to your movements without disturbing the person next to you. Choose a firmness and cover that suit you – a headboard in matching fabric is included.
- Pocket springs
- Firm
- Washable cover
Material
Mattress base- Bed slats:
- Solid pine
- Ribbon:
- 100% polyester
- Headboard/ Footboard:
- Solid pine, Adhesive
- Bedside:
- Solid pine, Solid pine, Adhesive
- Hook and loop fastener, hard part:
- Polyamide plastic
Pocket spring core- Ticking, top:
- 100 % polyester (100% recycled)
- Ticking, underside:
- 100% polypropylene
- Comfort filling:
- Polyurethane foam 28 kg/cu.m.
- Pocket spring unit:
- Steel
- Filling, underside:
- 100% polyester (min. 60% recycled)
Cover for spring mattress base- Base fabric/ Ticking, top:
- 100 % polyester (100% recycled)
- Fabric/ Ticking, side:
- 100% polyester (min. 90% recycled)
- Filling, side:
- 100 % polyester
- Lining, side:
- 100% polypropylene
LegSolid wood, Stain, Clear acrylic lacquer
Connection fitting for spring base- Threaded Pin/ Cap/ Washer:
- Steel
- Connector:
- Polyamide plastic
- Wing nut:
- Polypropylene plastic, Steel
Headboard- Top frame/ Bottom frame:
- Solid wood, Plywood, Fibreboard
- Filling:
- 100 % polyester, Wood fibres 84% / Polyethylene 8% / Polypropylene 8%
- Lining/ Protection layer:
- 100% polypropylene
Headboard cover- Front side/ Fabric:
- 100% polyester (min. 90% recycled)
- Backside:
- 100% polypropylene
Care
HeadboardClean with a duster or vacuum lightly using the soft brush attachment.
Pocket spring coreClean with a duster or vacuum lightly using the soft brush attachment.
Do not wash.
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dryclean.
Cover for spring mattress baseMachine wash, max 40°C, normal process.
Close the zipper before washing.
Do not bleach.
Do not iron.
Do not dryclean.
Line drying.
Headboard coverMachine wash, max 40°C, normal process.
Close the zipper before washing.
Do not bleach.
Do not dryclean.
Line drying.
Mattress baseWipe clean with a damp cloth.
Wipe dry with a clean cloth.
Stains can be removed by using an eraser, fine sandpaper, soap, dishwashing detergent or paint thinner.
For increased stability, re-tighten the screws and other connectors when necessary.
LegWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
Assembly instructions
LEJDEBERGEN Mattress base805.966.47RENFJÄLLET Cover for spring mattress base905.984.67BRENNÅSEN Leg002.996.89LÅNSTAÅSEN Connection fitting for spring base206.021.75LAXHÖJDEN Headboard806.021.77RENFJÄLLET Pocket spring mattress base, incl leg and headboard firm/Tibbleby beige/grey, 160x200 cmAdvice & Care instructions
LEJDEBERGEN Mattress base805.966.47FEMTÅSEN Pocket spring core005.972.07BRENNÅSEN Leg002.996.89
Pocket springs that respond independently without transferring motion to others.
All bed covers are easy to keep clean since they’re removable and can be machine washed.
Quick and easy to assemble or disassemble without the need for tools.
If you want to change the look, covers and legs in different expressions are sold separately.
Care instructions can be found inside the cover.
226 springs per square metre in a 90x200 cm mattress.
Personalise your comfort with a mattress pad and/or pillow, sold separately.
When positioning the spring core, the white side should be facing up.
To complete assembly of the frame, legs are required.
You can sleep on the mattress right away, but we recommend loosening and resecuring the cover after 3–4 days to let the pocket springs fully recover after being roll-packed.
IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Material
Mattress base- Bed slats:
- Solid pine
- Ribbon:
- 100% polyester
- Headboard/ Footboard:
- Solid pine, Adhesive
- Bedside:
- Solid pine, Solid pine, Adhesive
- Hook and loop fastener, hard part:
- Polyamide plastic
Pocket spring core- Ticking, top:
- 100 % polyester (100% recycled)
- Ticking, underside:
- 100% polypropylene
- Comfort filling:
- Polyurethane foam 28 kg/cu.m.
- Pocket spring unit:
- Steel
- Filling, underside:
- 100% polyester (min. 60% recycled)
Cover for spring mattress base- Base fabric/ Ticking, top:
- 100 % polyester (100% recycled)
- Fabric/ Ticking, side:
- 100% polyester (min. 90% recycled)
- Filling, side:
- 100 % polyester
- Lining, side:
- 100% polypropylene
LegSolid wood, Stain, Clear acrylic lacquer
Connection fitting for spring base- Threaded Pin/ Cap/ Washer:
- Steel
- Connector:
- Polyamide plastic
- Wing nut:
- Polypropylene plastic, Steel
Headboard- Top frame/ Bottom frame:
- Solid wood, Plywood, Fibreboard
- Filling:
- 100 % polyester, Wood fibres 84% / Polyethylene 8% / Polypropylene 8%
- Lining/ Protection layer:
- 100% polypropylene
Headboard cover- Front side/ Fabric:
- 100% polyester (min. 90% recycled)
- Backside:
- 100% polypropylene
Care
HeadboardClean with a duster or vacuum lightly using the soft brush attachment.
Pocket spring coreClean with a duster or vacuum lightly using the soft brush attachment.
Do not wash.
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dryclean.
Cover for spring mattress baseMachine wash, max 40°C, normal process.
Close the zipper before washing.
Do not bleach.
Do not iron.
Do not dryclean.
Line drying.
Headboard coverMachine wash, max 40°C, normal process.
Close the zipper before washing.
Do not bleach.
Do not dryclean.
Line drying.
Mattress baseWipe clean with a damp cloth.
Wipe dry with a clean cloth.
Stains can be removed by using an eraser, fine sandpaper, soap, dishwashing detergent or paint thinner.
For increased stability, re-tighten the screws and other connectors when necessary.
LegWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
- This mattress has been tested and meets the requirements for durability set forth by standard EN 1957, and flammability requirements set forth by EN 597-1.This bed frame has been tested and meets the requirements for safety, durability and stability set forth by standard EN1725.
Assembly instructions
LEJDEBERGEN Mattress base805.966.47RENFJÄLLET Cover for spring mattress base905.984.67BRENNÅSEN Leg002.996.89LÅNSTAÅSEN Connection fitting for spring base206.021.75LAXHÖJDEN Headboard806.021.77RENFJÄLLET Pocket spring mattress base, incl leg and headboard firm/Tibbleby beige/grey, 160x200 cmAdvice & Care instructions
LEJDEBERGEN Mattress base805.966.47FEMTÅSEN Pocket spring core005.972.07BRENNÅSEN Leg002.996.89
- 805.966.47
2 × LEJDEBERGEN
Mattress base- Width: 43 cm
- Height: 8 cm
- Length: 203 cm
- Weight: 20.48 kg
005.972.072 × FEMTÅSEN
Pocket spring core- Length: 95 cm
- Weight: 11.00 kg
- Diameter: 42 cm
905.984.672 × RENFJÄLLET
Cover for spring mattress base- Width: 38 cm
- Height: 15 cm
- Length: 57 cm
- Weight: 2.27 kg
002.996.892 × BRENNÅSEN
Leg- Width: 24 cm
- Height: 8 cm
- Length: 29 cm
- Weight: 2.72 kg
206.021.751 × LÅNSTAÅSEN
Connection fitting for spring base- Width: 15 cm
- Height: 4 cm
- Length: 18 cm
- Weight: 0.19 kg
806.021.771 × LAXHÖJDEN
Headboard- Width: 47 cm
- Height: 12 cm
- Length: 173 cm
- Weight: 18.20 kg
906.021.861 × LJUSFJÄLLET
Headboard cover- Width: 25 cm
- Height: 7 cm
- Length: 37 cm
- Weight: 0.90 kg
This product is made up of more than one component. You can find the details of these components below.
