ENHET Laundry, white, 139x63.5x87.5 cm

Basematerial:

Particleboard

Front side/ Backside:

Plastic foil

Edge:

Plastic edging

Side panel/ Bottom panel:

Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Plastic foil, Plastic edging

Back rail/ Filling:

Particleboard, Plastic foil, Plastic edging

Tube:

Steel, Powder coating

Foot:

Polypropylene plastic (min. 20% recycled)

Plate:

Steel, Powder coating, Galvanized steel

Rivet:

Steel, Epoxy/Acrylic coating

Tubes:

Steel, Powder coating

Wedge:

Steel, Epoxy/Acrylic coating

Side panel/ Bottom panel/ Top panel/ Shelf:

Particleboard, Plastic foil, Plastic edging

Back panel:

Fibreboard, Plastic foil

Body:

Zinc, Metallized

Inner body:

Reinforced polyamide plastic

Spout:

Brass, Brass, Metallized

Polypropylene plastic

Particleboard, High-pressure melamine laminate, Laminate

Tubes/ Cleaning plug:

Polypropylene plastic

Strainer/ Strainer basket:

Stainless steel

Seals:

Synthetic rubber, Synthetic rubber

Body/ Body:

Stainless steel

Foam/ Foam:

Polyurethane plastic

Support panel/ Support panel:

Polypropylene plastic

Wipe clean with a mild soapy solution.

Wipe dry with a clean cloth.

Wipe clean with a mild soapy solution.

Wipe dry with a clean cloth.

Wet marks should always be dried off as soon as possible to stop moisture penetration.

Wipe dry with a clean cloth.

Wipe dry with a clean cloth.

Laminate is sensitive to corrosive chemicals like descaling agents, chlorine or acetone. Remove immediately in case of spillage. Regular household detergents may be used.

To prevent permanent stains on the worktop, wipe clean spills or messes immediately with a soft cloth dampened in water and a mild washing-up detergent or soap.