Product details
Combine the seat modules with armrests. Use the planning tool to put the modules together in different ways until the combination feels just right.
You can complete your sofa with TUNSTA table, placing it as a separate coffee table or as an integrated side table to create a complete solution that suits your needs.
You can renew the sofa and vary the expression with different removable and washable covers and add personality with cushions and throws.
A flexible solution that you can always update, expand and change if conditions shift.
The modules look equally nice from all sides so you can place your sofa along the wall or in the middle of the room.
The seat cushion is made with foam and zigzag springs that provide supportive comfort when sitting or lying down. The generous backrest is comfy for both back and lumbar.
This cover is made of dope-dyed Gunnared fabric in polyester. It is a durable fabric with a wool-like feel, a warm look and a two-toned melange effect.
The cover is easy to keep clean since it can be machine washed and is easy to take off and put on again.
Suitable for business use.
10-year guarantee. Read about the terms in the guarantee brochure.
Max load on table top: 40 kg.
- Clip:
- Polypropylene plastic
- Frame:
- Polyurethane foam 30 kg/cu.m., Plywood, Laminated veneer lumber
- Lining:
- 100% polypropylene
- Frame:
- Polyurethane foam 20 kg/cu.m., Polyurethane foam 25 kg/cu.m., Plywood
- Lining:
- 100% polypropylene
- Table top:
- Particleboard, Plastic foil (min. 70% recycled), Plastic foil, Plastic edging, Plastic edging
- Bottom panel/ Side panel/ Partition:
- Particleboard, Paper foil, Plastic edging, Plastic edging
- Leg:
- Steel, Epoxy/polyester powder coating
- Bracket:
- Steel, Galvanized
- 100% polyester (min. 90% recycled)
- Solid beech, Tinted clear lacquer
Machine wash, max 40°C, normal process.
To be washed separately.
Do not bleach.
Do not tumble dry.
Iron, max 150°C.
Iron on reverse.
Professional dry cleaning in tetrachloroethene and hydrocarbons, normal process.
This table has been developed for public use and meets the requirements for safety, durability and stability set forth in the following standard: EN 15372 and ANSI/BIFMA X:5.5.This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 110 kg.The cover’s ability to resist abrasion has been tested to handle 50,000 cycles. 15,000 cycles or more is suitable for furniture used every day at home. Over 30,000 cycles means a good ability to resist abrasion.The cover has a lightfastness level of 6 (the ability to resist colour fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.
Measurements
- Width: 346 cm
- Height: 73 cm
- Depth: 80 cm
- Seat height: 42 cm
- Seat depth: 60 cm
- Free height under furniture: 20 cm
This product comes as 19 packages.
2-seat module frameArticle number005.194.17- Width: 74 cm
- Height: 23 cm
- Length: 144 cm
- Weight: 17.70 kg
- Package(s): 2
Frame armrestArticle number005.184.32- Width: 54 cm
- Height: 17 cm
- Length: 76 cm
- Weight: 6.00 kg
- Package(s): 6
Side tableArticle number502.995.02- Width: 51 cm
- Height: 6 cm
- Length: 88 cm
- Weight: 13.76 kg
- Package(s): 1
Cover for armrestArticle number705.195.98- Width: 25 cm
- Height: 3 cm
- Length: 37 cm
- Weight: 0.48 kg
- Package(s): 6
Cover for 2-seat moduleArticle number005.196.72- Width: 38 cm
- Height: 3 cm
- Length: 57 cm
- Weight: 1.00 kg
- Package(s): 2
LegArticle number405.184.30- Width: 17 cm
- Height: 4 cm
- Length: 24 cm
- Weight: 0.92 kg
- Package(s): 2
