Good to know

Materials and care

Material

Table

Table top:: Particleboard, Birch veneer, Stain, Tinted clear acrylic lacquer, Paper foil, Clear lacquer

Under frame/ Leg:: Solid pine, Adhesive, Stain, Tinted clear acrylic lacquer, Clear lacquer

Chair

Base fabric/ Cover:: 100 % polyester (100% recycled)

Seat frame:: Solid wood

Seat:: Layer-glued wood veneer

Comfort material:: Polyurethane foam 35 kg/cu.m.

Cover/ Smoulder resistant lining:: Polyester wadding

Hook and loop fastener:: 100% nylon

Piping/ Zipper:: 100% polyester

Backrest frame/ Back frame/ Support:: Steel, Epoxy/polyester powder coating

Back panel:: Fibreboard

Comfort filling:: Polyurethane foam 25 kg/cu.m.

Comfort filling/ Fabric:: 100% polyester (min. 90% recycled)

Leg:: Solid wood, Paint

Care

Machine wash, max 40°C, normal process.

Do not bleach.

Do not tumble dry.

Iron, max 150°C.

Professional dry cleaning in tetrachloroethene and hydrocarbons, normal process.

Wipe clean with a cloth dampened in a mild cleaner.

Wipe dry with a clean cloth.

For maximum quality, re-tighten the screws when necessary.

Safety and compliance

The cover has a lightfastness level of 6 (the ability to resist colour fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.This cover’s ability to resist abrasion has been tested to handle 55,000 cycles. 15,000 cycles or more is suitable for furniture used every day at home. Over 30,000 cycles means a good ability to resist abrasion.This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 110 kg.

Assembly and documents