ÄLMAREN Kitchen mixer tap w pull-out spout, stainless steel colour

Product details

• Good to know

  If you are uncertain about the installation, contact a professional. The installation shall be made in accordance with valid local building and plumbing regulations.

  To be mounted in a 35 mm hole in a max. 50 mm thick sink/worktop.

  To make a hole for the kitchen mixer tap FIXA 2-piece tool set can be recommended; sold separately.

  Water and energy saving aerator (5.7 l/min.) for high-pressure systems included.

  Connection hoses with 1/2" connection included. Connection length: 50 cm.

  A tool is included that makes it easy to install the mixer tap in place.

  Max. temperature hot water connection 80°C/176°F. Recommended temperature is 65°C/149°F.

  Spare parts are available to prolong the life of your product. For more information, contact IKEA Customer Services at your IKEA store or IKEA.com.

  The spout can be pulled out approx. 30 cm.

  Swivel spout is preset to 120° but can be changed to 90°.

• Materials and care

  Material

  Spout:

  Stainless steel, Metallized

  Body:

  Zinc, Metallized

  Care

  Do not use scouring-powder, steel wool, hard or sharp tools which can scratch the surface.

  Wipe clean with a soft cloth dampened in water and a mild washing-up detergent or soap, if necessary.

  Wipe dry with a clean cloth.

• Safety and compliance
  Tested and certified to relevant national and international mechanical, quality, safety and hygienic standards.This tap is for use on high pressure water systems. Tested to work with a max. pressure of 10 bar (1000 kPa). Recommended working pressure range is 1.0 – 5.0 bar (100 kPa – 500 kPa).
• Assembly and documents

  Assembly instructions

  ÄLMAREN Kitchen mixer tap w pull-out spout004.941.67

  Advice and care instructions

  ÄLMAREN Kitchen mixer tap w pull-out spout004.941.67