Materials and care

Material

Extendable table

Table top/ Extension leaf:: Particleboard, Melamine foil, Acrylic paint, Plastic edging, Paint

Side rail:: Fibreboard, Acrylic paint, Fibreboard, Acrylic paint, Fibreboard, Acrylic paint, Plastic edging

Extension rail:: Fibreboard, Acrylic paint, Plastic edging

Support rail/ Column:: Fibreboard, Acrylic paint

Holder:: Fibreboard

Bottom panel:: Particleboard, Paper foil, Acrylic paint, Plastic edging

Leg:: Solid wood, Adhesive, Acrylic paint

Chair

Backrest frame/ Backrest/ Seat frame/ Bracket/ Leg:: Steel, Epoxy/polyester powder coating

Seat:: Polyurethane foam 35225 kg/cu.m., Birch plywood

Fabric cover/ Fabric:: 100% polyester (min. 90% recycled)

Inner fabric:: Polyester wadding

Spacer/ End cap:: Polypropylene plastic (min. 50% recycled)

Foot:: Polyamide plastic

Safety and compliance

This cover’s ability to resist abrasion has been tested to handle 55,000 cycles. 15,000 cycles or more is suitable for furniture used every day at home. Over 30,000 cycles means a good ability to resist abrasion.A maximum of 3 chairs can be stacked together.This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 110 kg.This seating furniture has been tested for home use and meets the requirements for durability and safety, set forth in the following standards: EN 12520 and EN 1022.The cover has a lightfastness level of 6 (the ability to resist colour fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.We recommend that the stackable furniture is lifted and moved one at a time.

Assembly and documents