VRENA Worktop, oak/veneer, 246x2.8 cm
How to get it
Checking availability...Thick veneer worktops bring a warm, natural look to your kitchen. Made of particle board with a top layer of veneer, they use less raw material while offering durability.
25 year guarantee
Material
- Top/ Backside/ Edge:
- Thick oak veneer, Oil-acrylic
- Basematerial:
- Particleboard
Care
Do not place a toaster, coffee maker, kettle or other kitchen appliances that emit heat directly over a seam between two worktops because the heat can damage the seam.
Areas where the worktop may dry out, such as edges and areas around the sink and hob, require frequent treatment.
The worktop surface is pre-treated at the factory with hard wax oil. Due to the nature of the material, treat the edges and cut-outs with wood treatment oil, prior to installation.
To ensure that your worktop ages gracefully, treat it regularly with wood treatment oil; it gives the surface a beautiful sheen, protects the wood and prolongs the life of the worktop.
Even though thick veneer is a durable material you should never place hot pots or pans directly on the worktop without a trivet or pot stand.
Never use a steel scourer, scourer pad, souring agent or similar products as they can scratch the surface.
Worktops in laminate or thick veneer that are installed above a dishwasher or oven shall be protected on the underside with FENSJÖ diffusion barrier.
Assembly instructions
VRENA Worktop205.108.21
25 year guarantee. Read about the terms in the guarantee brochure.
The worktop is made of particle board covered with a top layer of veneer. This method allows us to use less wood in production.
Worktop with a thick oak veneer, a hardwearing natural material that can be sanded and surface treated when required.
Oak is an exceedingly strong and durable hardwood with a prominent grain. It darkens beautifully with age acquiring a golden-brown undertone.
Not suitable for use in wet rooms.
Not suitable for outdoor use.
Finished edges on all 4 sides.
Please note that the actual colours of our products may vary slightly from the colours shown online.
Material
- Top/ Backside/ Edge:
- Thick oak veneer, Oil-acrylic
- Basematerial:
- Particleboard
Care
Do not place a toaster, coffee maker, kettle or other kitchen appliances that emit heat directly over a seam between two worktops because the heat can damage the seam.
Areas where the worktop may dry out, such as edges and areas around the sink and hob, require frequent treatment.
The worktop surface is pre-treated at the factory with hard wax oil. Due to the nature of the material, treat the edges and cut-outs with wood treatment oil, prior to installation.
To ensure that your worktop ages gracefully, treat it regularly with wood treatment oil; it gives the surface a beautiful sheen, protects the wood and prolongs the life of the worktop.
Even though thick veneer is a durable material you should never place hot pots or pans directly on the worktop without a trivet or pot stand.
Never use a steel scourer, scourer pad, souring agent or similar products as they can scratch the surface.
Worktops in laminate or thick veneer that are installed above a dishwasher or oven shall be protected on the underside with FENSJÖ diffusion barrier.
- Supporting legs are required when an overhang exceeds 25 cm. The maximum distance between these legs should not be more than 80 cm.
Assembly instructions
VRENA Worktop205.108.21
- 205.108.21
1 × VRENA
Worktop- Width: 65 cm
- Height: 4 cm
- Length: 253 cm
- Weight: 30.23 kg
