UTÅKER Stackable bed with 2 mattresses, pine/Vannareid extra firm, Single
How to get it
Checking availability...You have 365 days to return your purchase
When stacked, these 2 beds become a single bed or sofa. Unstacked, you get a double bed, corner sofa or spare bed for sleepovers. And, if you need space for yoga, just stack them again.
- Pocket springs
- Roll packed
- Washable cover
- Stackable
Material
Stackable bed- Bedside/ Head/footboard/ Leg/ Supporting rail:
- Solid pine
- Bed slats:
- Layer-glued wood veneer, Adhesive resin as coating
- Ribbon:
- 100 % polyester
Pocket sprung mattress- Fabric:
- 55% cotton, 45% polyester (min. 90% recycled)
- Ticking:
- 55% cotton, 45 % polyester
- Ticking, underside/ Lining/ Lining, underside:
- 100% polypropylene
- Filling:
- 100 % polyester
- Comfort filling:
- Polyurethane foam 25 kg/cu.m.
- Pocket spring unit:
- 100% polypropylene, Steel
- Filling, underside:
- Polyester wadding
Care
Stackable bedWipe clean with a damp cloth.
Wipe dry with a clean cloth.
Stackable bed with 2 mattressesStains can be removed by using an eraser or fine sandpaper.
Assembly instructions
UTÅKER Stackable bed503.604.86
You can quickly convert the stacked beds into a double bed, twin beds or corner sofa.
The lightweight frames are easy to lift and move.
The compact design is perfect for tight spaces or under low ceilings, so you can make the most of your available space.
The stacked beds stand steady since the upper bed has small plastic feet which fit into holes on the lower bed.
Can be used with up to 13 cm thick mattresses.
2 straps with press studs prevent the beds from sliding apart when they are next to each other.
2 VANNAREID sprung mattresses included.
Slatted bed base is included.
Bed linen sold separately.
May be completed with FIXA stick-on floor protectors; protect the underlying surface against wear.
The daybed must be combined with two mattresses, Single. They are placed on top of each other when you use the daybed as a single bed, and next to each other when you use it as a double bed.
Material
Stackable bed- Bedside/ Head/footboard/ Leg/ Supporting rail:
- Solid pine
- Bed slats:
- Layer-glued wood veneer, Adhesive resin as coating
- Ribbon:
- 100 % polyester
Pocket sprung mattress- Fabric:
- 55% cotton, 45% polyester (min. 90% recycled)
- Ticking:
- 55% cotton, 45 % polyester
- Ticking, underside/ Lining/ Lining, underside:
- 100% polypropylene
- Filling:
- 100 % polyester
- Comfort filling:
- Polyurethane foam 25 kg/cu.m.
- Pocket spring unit:
- 100% polypropylene, Steel
- Filling, underside:
- Polyester wadding
Care
Stackable bedWipe clean with a damp cloth.
Wipe dry with a clean cloth.
Stackable bed with 2 mattressesStains can be removed by using an eraser or fine sandpaper.
- Stack max. 2 beds on top of each other.Do not place anything between the stacked beds that risks lifting the upper bed. For safety reasons it is important that all four legs of the upper bed are firmly placed into the holes of the lower bed.
Assembly instructions
UTÅKER Stackable bed503.604.86
- 503.604.86
1 × UTÅKER
Stackable bedPackage 1- Width: 24 cm
- Height: 10 cm
- Length: 191 cm
- Weight: 15.35 kg
Package 2- Width: 24 cm
- Height: 10 cm
- Length: 191 cm
- Weight: 15.35 kg
904.867.332 × VANNAREID
Pocket sprung mattress- Length: 99 cm
- Weight: 16.05 kg
- Diameter: 31 cm
This product is made up of more than one component. You can find the details of these components below.
