ÄNGSJÖN / BACKSJÖN Wash-stnd w drawers/wash-basin/taps, oak effect, 100x48x69 cm
How to get it
10 year guarantee
ÄNGSJÖN bathroom furniture has a modern appeal with minimal details so you can start each day with a clean slate. This combo has 2 spacious drawers and a large, sleek wash-basin with room for two.
Product details
Generous, full drawer storage capacity for all your essentials as piping is led through the back and not via a cut-out in the drawers. Drawers open all the way for a good overview.
The oak effect finish with a natural wooden look transforms the space into a relaxing, at-home wellness retreat. A contemporary expression enhanced with integrated handles, minimising unnecessary details.
The wash-basin is made of crushed marble which enables sharp, crisp edges with a scratch-resistant surface. This gives a clean and modern look.
This cabinet is to be wall-mounted. This creates a spacious feel but also makes it easier to clean floors underneath. It is also possible to add legs depending on the look you prefer.
Combine with other cabinets in the ÄNGSJÖN series to create a coordinated bathroom solution that fits your space and needs.
10 year guarantee. Read about the terms in the guarantee brochure.
Good to know
Comprises: 1 wash-stand with drawers, 1 integrated wash-basin, 1 water trap and 2 mixer taps.
If you are uncertain about the installation, contact a professional. The installation shall be made in accordance with valid local building and plumbing regulations.
Silicone is needed for installation, not included.
Materials and care
Material
- Frame/ Middle rail/ Bottom panel/ Drawer divider/ Drawer sides/ Drawer back:
- Particleboard, Plastic foil, Plastic edging, Plastic edging (min. 50% recycled)
- Top rail:
- Fibreboard, Plastic foil, Plastic edging, Plastic edging (min. 50% recycled)
- Drawer front:
- Particleboard, Fibreboard, Plastic foil, Plastic edging, Plastic edging (min. 50% recycled)
- Drawer bottom:
- Fibreboard, Plastic foil
- Basematerial:
- Polyester/crushed marble, Polyester
- Cover/ Spring:
- Stainless steel
- Cover cap/ Mechanism:
- Acetal plastic
- Sealing ring:
- Synthetic rubber
- Cover cap:
- Polycarbonate/ABS plastic
- Zinc, Metallized
- Water trap frame/ Nut/ Outlet pipe/ Waste pipe:
- Polypropylene plastic
- Washer/ Seals:
- Synthetic rubber
- Strainer:
- Stainless steel
- Assembly tool:
- ABS plastic
Care
Wipe clean with a mild soapy solution.
Wet marks should always be dried off as soon as possible to stop moisture penetration.
Wipe dry with a clean cloth.
Do not use scouring powder, steel wool, hard or sharp tools which can scratch the surface of the washbasin.
Safety and compliance
Assembly and documents
Assembly instructions
ÄNGSJÖN Wash-stand with drawers705.353.53BACKSJÖN Wash-basin905.499.38RÄNNILEN Water trap, 1 bowl304.224.14Advice and care instructions
LUNDSKÄR Wash-basin mixer tap205.326.15Measurements
- Width: 100.2 cm
- Depth: 47.5 cm
- Height: 68.8 cm
- Drawer front, thickness: 16 mm
Packaging
ÄNGSJÖN
Article Number705.353.53- Width: 48 cm
- Height: 8 cm
- Length: 114 cm
- Weight: 20.43 kg
- Package(s): 1
- Width: 50 cm
- Height: 7 cm
- Length: 104 cm
- Weight: 16.90 kg
- Package(s): 1
BACKSJÖN
Article Number905.499.38- Width: 51 cm
- Height: 16 cm
- Length: 110 cm
- Weight: 17.50 kg
- Package(s): 1
LUNDSKÄR
Article Number205.326.15- Width: 20 cm
- Height: 6 cm
- Length: 35 cm
- Weight: 1.67 kg
- Package(s): 2
RÄNNILEN
Article Number304.224.14- Width: 27 cm
- Height: 8 cm
- Length: 44 cm
- Weight: 0.39 kg
- Package(s): 1