Meet with our kitchen planners for consultation.

Brown wooden countertop, PINNARP, rectangular, fine line walnut veneer.

PINNARP Custom made worktop, walnut/veneer, 63.6-125x3.8 cm

Wooden worktop with dark and light brown tones, sleek design, high-quality finish.

Modern kitchen with dark green cabinets, wooden island countertop, two black bar stools, plates, wine glasses, and a carafe.

Kitchen counter with cutting board, knife, onions, cup, plant.

PINNARP Custom made worktop, walnut/veneer, 63.6-125x3.8 cm

Name: PINNARP Custom made worktop - walnut/veneer 63.6-125x3.8 cm
Brand: IKEA
SKU: 803.774.09
Price: 595 EUR
Availability: OutOfStock

Price 595€/m2

Price incl. VAT

Choose size

Try the calculator

Plan your custom worktop

PINNARP

803.774.09

Thick veneer worktops bring a warm, natural look to your kitchen. Made of particle board with a top layer of veneer, they use less raw material while offering durability. Available to order custom-made.

25 year guarantee

More information

Material
Top:
Thick walnut veneer, Oil-acrylic
Backside:
Laminate, Plastic edging
Edge:
Thick walnut veneer, Oil
Basematerial:
Particleboard
Care
Do not place a toaster, coffee maker, kettle or other kitchen appliances that emit heat directly over a seam between two worktops because the heat can damage the seam.
Areas where the worktop may dry out, such as edges and areas around the sink and hob, require frequent treatment.
The worktop surface is pre-treated at the factory with hard wax oil. Due to the nature of the material, treat the edges and cut-outs with wood treatment oil, prior to installation.
To ensure that your worktop ages gracefully, treat it regularly with wood treatment oil; it gives the surface a beautiful sheen, protects the wood and prolongs the life of the worktop.
Even though thick veneer is a durable material you should never place hot pots or pans directly on the worktop without a trivet or pot stand.
Never use a steel scourer, scourer pad, souring agent or similar products as they can scratch the surface.
Worktops in laminate or thick veneer that are installed above a dishwasher or oven shall be protected on the underside with FENSJÖ diffusion barrier.

25 year guarantee. Read about the terms in the guarantee brochure.

The worktop is made of particle board covered with a top layer of veneer. This method allows us to use less wood in production.

Worktop with a thick walnut veneer, a hardwearing natural material that can be sanded and surface treated when required.

Walnut is a straight-grained hardwood with good stability and strength. It gets lighter as it ages – from the dark brown to a rich honey colour that appears through the grain.

Every worktop is unique, with varying grain pattern and natural colour shifts that are part of the charm of wood.

For quick installation and easy maintenance the worktop is pre-treated with hard wax oil.

The worktop has a fine line design that gives it a timeless look inspired by sleek modern flooring.

The worktop is custom-made for your kitchen solution. Select the appropriate depth (30-125cm) and length (maximum of 4m without joints).

You can order the length and depth you need for your kitchen solution as well as cut-outs for your sink, tap and hob or gas hob.

You can order an under-glued sink with your custom-made worktop.

IKEA of Sweden

Additional charges will apply for services and customisation options. Book an appointment with an IKEA store to plan your worktop and receive complete price information.
Not suitable for use in wet rooms.
Not suitable for outdoor use.
Finished edges on all 4 sides.
Please note that the actual colours of our products may vary slightly from the colours shown online.
IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Material
Top:
Thick walnut veneer, Oil-acrylic
Backside:
Laminate, Plastic edging
Edge:
Thick walnut veneer, Oil
Basematerial:
Particleboard
Care
Do not place a toaster, coffee maker, kettle or other kitchen appliances that emit heat directly over a seam between two worktops because the heat can damage the seam.
Areas where the worktop may dry out, such as edges and areas around the sink and hob, require frequent treatment.
The worktop surface is pre-treated at the factory with hard wax oil. Due to the nature of the material, treat the edges and cut-outs with wood treatment oil, prior to installation.
To ensure that your worktop ages gracefully, treat it regularly with wood treatment oil; it gives the surface a beautiful sheen, protects the wood and prolongs the life of the worktop.
Even though thick veneer is a durable material you should never place hot pots or pans directly on the worktop without a trivet or pot stand.
Never use a steel scourer, scourer pad, souring agent or similar products as they can scratch the surface.
Worktops in laminate or thick veneer that are installed above a dishwasher or oven shall be protected on the underside with FENSJÖ diffusion barrier.