TONSTAD / SKANSNÄS Table and 4 chairs, brown oak veneer/brown beech, 150x80 cm
Choose Chair:
How to get it
Checking availability...Collect 2799 points with
It's OK to change your mind
This 4-seat table with brushed matte oak veneer and smooth, rounded corners is made to be your everyday favourite spot.
- Solid wood
- Wood veneer
Material
Table- Top panel:
- Particleboard, Tinted clear acrylic lacquer, Paper foil, Paper edging, Oak veneer, Stain, Tinted clear lacquer
- Side rail/ Leg:
- Solid wood, Adhesive, Oak veneer, Stain, Tinted clear acrylic lacquer
Chair- Side frame/ Cross rail:
- Solid beech, Adhesive, Stain, Tinted clear lacquer
- Seat:
- Steel, Paper, Epoxy/polyester powder coating, Clear lacquer
- Backrest:
- Layer-glued wood veneer, Beech veneer, Stain, Tinted clear lacquer
Care
ChairWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
If placed close to a radiator or other source of heat, the material can dry out and deteriorate.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
TableWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
Assembly instructions
TONSTAD Table806.000.60SKANSNÄS Chair505.632.43TONSTAD / SKANSNÄS Table and 4 chairs, brown oak veneer/brown beech, 150x80 cmAdvice and care instructions
TONSTAD Table806.000.60
Stable construction with sturdy wooden legs and a real wood veneer surface, stained and lacquered in layers to resist marks and wear, letting you enjoy every moment worry-free.
Each table is unique, with varying grain patterns and natural colour shifts that are part of the charm of wood.
The seat is made of handwoven paper cord, a naturally cool, comfortable and resistant material, used for years in furniture making.
Each chair is unique, with varying grain patterns and natural colour shifts that are part of the charm of wood.
Only recommended for indoor use.
Paper cord is a naturally resistant material that can last for many years. The seat is available as a spare part and can be replaced if needed.
A bit screwdriver is required to assemble this table, sold separately as a part of TRIXIG 15-piece toolset.
To prevent surface scratches, complete with TRIXIG stick-on floor protectors, sold separately.
Material
Table- Top panel:
- Particleboard, Tinted clear acrylic lacquer, Paper foil, Paper edging, Oak veneer, Stain, Tinted clear lacquer
- Side rail/ Leg:
- Solid wood, Adhesive, Oak veneer, Stain, Tinted clear acrylic lacquer
Chair- Side frame/ Cross rail:
- Solid beech, Adhesive, Stain, Tinted clear lacquer
- Seat:
- Steel, Paper, Epoxy/polyester powder coating, Clear lacquer
- Backrest:
- Layer-glued wood veneer, Beech veneer, Stain, Tinted clear lacquer
Care
ChairWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
If placed close to a radiator or other source of heat, the material can dry out and deteriorate.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
TableWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
- The cover has a lightfastness level of 5 (the ability to resist colour fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.This cover's ability to resist abrasion has been tested to handle 25,000 cycles. A cover that withstands 15,000 cycles or more is suitable for furniture that should withstand everyday use in the home.This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 110 kg.This seating furniture has been tested for public use and meets the requirements for safety, durability and stability set forth in the following standards: EN 16139-Level 1.
Assembly instructions
TONSTAD Table806.000.60SKANSNÄS Chair505.632.43TONSTAD / SKANSNÄS Table and 4 chairs, brown oak veneer/brown beech, 150x80 cmAdvice and care instructions
TONSTAD Table806.000.60
- 806.000.60
1 × TONSTAD
TablePackage 1- Width: 30 cm
- Height: 6 cm
- Length: 150 cm
- Weight: 10.90 kg
Package 2- Width: 84 cm
- Height: 3 cm
- Length: 157 cm
- Weight: 16.52 kg
505.632.434 × SKANSNÄS
Chair- Width: 54 cm
- Height: 10 cm
- Length: 80 cm
- Weight: 6.69 kg
This product is made up of more than one component. You can find the details of these components below.
