ANPASSA Wall mounted extractor hood, stainless steel
How to get it
1 year guarantee
1 year guarantee.
Product details
Control panel placed at front for easy access and use.
You can easily remove and clean the grease filter.
Good to know
Wall mounted extractor hood with 3 different speeds.
Extraction rate: 545 m³/h.
1x40W light bulb.
Materials & care
Care
Clean surfaces with a soft cloth dampened with water and a mild washing-up detergent/soap or a cleaning detergent specifically designed for the appliance.
Never use corrosive or abrasive detergents, abrasive sponges, scourers or metallic scrapers.
Safety and compliance
Measurements
- Width: 90.0 cm
- Depth: 64.0 cm
- Height: 58.5 cm
- Width of chimney: 41.0 cm
- Depth of chimney: 38.5 cm
Packaging
ANPASSA
Article Number403.151.83- Width: 73 cm
- Height: 57 cm
- Length: 97 cm
- Weight: 27.00 kg
- Package(s): 1
Functional solution
Sound levels
Sound levels for appliances are measured in decibels (dBs). Our extractor hoods have been tested in speed 3 to determine the dB level. The sound level of your extractor hood is affected by: • Type of installation. Exhaust-mode or recirculation-mode. • Length and diameter of the exhaust pipe between extractor and exhaust vent. The longer it is and the smaller the diameter, the louder it gets. • 90° bends. The more bends you have in the exhaust pipe, the greater the sound.
Quality
Sensitive to noise or have an open-plan home?
For extractor hoods, a noise level below 60 dB is considered low – roughly equivalent to a normal conversation between two people. We measure the noise level of our hoods at max speed, making it easier to compare different models. Note that sound levels decrease at lower speeds, and recirculating hoods are typically louder than those vented outdoors. Noise may also increase if the ducting is long or has several bends, as the air has to work harder to pass through the system.