Related products
Use this lighting to avoid waking up your family members, since a soft light automatically turns on when you open your wardrobe or drawer. Place it where you like – it’s battery operated and rechargeable.
- Motion sensor
- Battery-operated
Material
- Base/ Housing:
- ABS plastic (min. 50% recycled)
- Diffuser:
- Polycarbonate plastic
Care
Wipe clean with a dry cloth.
Assembly instructions
KÖLVATTEN LED lighting with sensor106.337.85KÖLVATTEN LED lighting with sensor, white/battery-operated, 70 cm

The slim design with clean lines makes the lighting easy to place wherever you like in the home, even inside bathroom cabinets and drawers.
Suitable for use in confined spaces, such as cabinets and closets, as the LED light source only emits low heat.
Easy to place wherever you like, even in drawers, since the lighting is battery operated and rechargeable.
The sensor reacts to your body movements at a distance of 1.5 m and automatically turns the light off after 60 seconds, should you forget to close the door or drawer.
Rechargeable batteries are sold separately.The charging function of this product only works with rechargeable batteries. IKEA recommends LADDA 2450 mAh HR06 AA 1.2V. 4 pcs are required.
USB-C cable and USB charger are sold separately.
With new, fully charged LADDA AA 2450 mAh rechargeable batteries, one charging will last approx. 60 days if the lighting strip is used 5 minutes per day.
For the lighting to work, it must be positioned in place with the sensor facing you.
The LED indicator blinks when charging and shines with a steady light when the batteries are fully charged.
Batteries are sold separately. IKEA recommends LADDA rechargeable battery 2450 mAh HR6 AA 1.2V. 4 pieces required.
Built-in LED light source that lasts approx. 25,000 hours.
Light colour: warm white (2700 Kelvin).
Colour Rendering Index (CRI): 90.
Batteries should be handed in for recycling in accordance with local environmental regulations for waste disposal.
Only use batteries that are intended for the product. Do not mix old and new batteries, different brands or types.
Observe the polarity marks plus (+) and minus (−) and ensure correct battery insertion into the product.
Material
- Base/ Housing:
- ABS plastic (min. 50% recycled)
- Diffuser:
- Polycarbonate plastic
Care
Wipe clean with a dry cloth.
- Keep batteries out of reach of children and animals.Do not deform, damage, dismantle, open or short-circuit batteries.Do not expose batteries to heat, fire or any type of liquid.WARNING! If a battery has been swallowed or if you suspect that a battery has been swallowed, seek immediate medical attention! Swallowing a battery may lead to severe injuries and death.
Assembly instructions
KÖLVATTEN LED lighting with sensor106.337.85KÖLVATTEN LED lighting with sensor, white/battery-operated, 70 cm

- 106.337.85
1 × KÖLVATTEN
LED lighting with sensor- Width: 5 cm
- Height: 3 cm
- Length: 72 cm
- Weight: 0.27 kg








