How to get it
- Light filtering
- Cut to size
- No drilling
This pleated blind can be mounted in any way for privacy and to filter the light coming in from outside. Pull from top to bottom or from bottom to top – or just cover a section in the middle of the window.
Product details
Suitable for rooftop windows, tilt windows and turn windows.
Can be cut to the desired width.
The blind can be cut and re-cut to fit a smaller window. Ensure that you do not exceed maximum cut length.
The blind is cordless for increased child safety.
Drill-free mounting using the 4 included brackets with adhesive tape. The adhesive has been tested and approved for smooth glass surfaces.
The assembly instructions include a table with numbers corresponding to those on the fabric and rails to facilitate precise measuring and cutting.
Easy to maneuver using either of the plastic handles at the top or bottom.
A series of holes ensure you cut with precision and also create a pleasant pattern when light filters through the holes.
The fabric dims daylight entering the room and reduces glare. It gives a comfortable sense of privacy as people cannot see in. At night, silhouettes can be perceived from outside when the room is lit.
Henrik Preutz
Good to know
Highly recommended to attach to surfaces made of glass.
For window frames or surfaces not recommended for the adhesive, mount the brackets with screws using a drill or screwdriver. The brackets are prepared with small holes for this purpose.
To reposition or reuse on another window, remove adhesive-mounted brackets with plastic hand scraper. Replace with new brackets available cost-free at IKEA stores or contact IKEA Customer Services for help.
For door windows or windows taller than 130 cm, mount 2 pleated blinds to cover the whole surface.
The top rail of the 100 cm wide blind can be cut max. 40 cm.
Suitable for rooftop windows, tilt windows and turn windows.
If you need to adapt the dimensions of the pleated blind to your window, cut the top/bottom rails and the rods with a metal saw. Cut the fabric with a safety knife.
The included tool makes it easier to get straight, accurate lines when adapting the size of your rail/rod/fabric. It also protects your fingers.
For a smooth, friction-free glide, apply a few drops of silicone spray lubricant to the lock mechanism in the brackets. Ensure the spray is suitable for plastic and metal.
Can also be used in bathrooms.
IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Materials & care
Material
- Fabric:
- 100 % polyester (100% recycled)
- Top rail/ Bottom rail:
- Aluminium (min. 70% recycled), Powder coating
- Rod:
- Stainless steel, Powder coating
- Lock mechanism:
- Polyamide plastic, ABS plastic, Reinforced polyamide plastic
- Handle:
- ABS plastic
- Tool:
- Polypropylene plastic
Care
Do not wash.
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dryclean.
Wipe clean with a dry cloth.
Assembly & documents
Assembly instructions
Measurements
- Area: 1.30 m²
- Length: 130 cm
- Width: 100 cm
Packaging
HORNVALLMO
Article number805.416.31- Width: 8 cm
- Height: 3 cm
- Length: 131 cm
- Weight: 0.90 kg
- Package(s): 1
Customer reviews
Accessories for HORNVALLMO
Function solution
The fabric dims the daylight
The fabric dims the daylight entering the room when it is brighter outside, and reduces glare. It gives you a comfortable sense of privacy because people cannot see in during the daytime. At night, when the room is lit, it is possible to perceive shapes and silhouettes from outside.