ENHET Laundry, white/oak effect, 139x63.5x90.5 cm
How to get it
10 year guarantee
This combo allows a lot of productivity in a small space. It has a dedicated spot for an appliance, a countertop and a cabinet for bulkier items. The sink is the key that makes this setup truly functional.
Product details
Cabinet code ENHET L110
A practical solution that provides both a workspace and a dedicated space for storing things underneath.
A sink in the laundry area is convenient for washing clothes by hand or filling/emptying cleaning buckets.
The countertop is suitable for use in wet or humid spaces which makes this solution a good option if you are creating a laundry area in your bathroom.
Add ENHET hooks to the supporting side panel to hang towels or create more storage space with SKATTÅN containers. Sold separately.
Good sense and feel in beautiful partnership. The foil surface resists moisture, scratches and bumps, while the wood pattern creates a lively and warm expression.
10 year guarantee. Read about the terms in the guarantee brochure.
Good to know
Appliances are sold separately.
The countertop is pre-cut to measure 139 cm. May not be cut.
Be aware that tools and preparation are required to cut holes for sink and tap to secure a perfect fit.
Cabinet, supporting side panel/leg, leg, countertop, sink, water trap, tap and knob/handle included.
IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Materials & care
Material
- Basematerial:
- Particleboard
- Front side/ Backside:
- Plastic foil
- Edge:
- Plastic edging
- Aluminium, Powder coating
- Side panel/ Bottom panel:
- Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Plastic foil, Plastic edging
- Back rail/ Filling:
- Particleboard, Plastic foil, Plastic edging
- Tube:
- Steel, Powder coating
- Foot:
- Polypropylene plastic (min. 20% recycled)
- Plate:
- Steel, Powder coating, Galvanized steel
- Rivet:
- Steel, Epoxy/Acrylic coating
- Tubes:
- Steel, Powder coating
- Wedge:
- Steel, Epoxy/Acrylic coating
- Basematerial:
- Stainless steel
- Foam:
- Polyurethane plastic
- Body:
- Zinc, Metallized
- Inner body:
- Reinforced polyamide plastic
- Spout:
- Brass, Brass, Metallized
- Particleboard, High-pressure melamine laminate, Laminate
- Tubes/ Cleaning plug:
- Polypropylene plastic
- Strainer/ Strainer basket:
- Stainless steel
- Seals:
- Synthetic rubber, Synthetic rubber
Care
Wipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
Wipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
Wet marks should always be dried off as soon as possible to stop moisture penetration.
Wipe dry with a clean cloth.
Wipe dry with a clean cloth.
Laminate is sensitive to corrosive chemicals like descaling agents, chlorine or acetone. Remove immediately in case of spillage. Regular household detergents may be used.
To prevent permanent stains on the worktop, wipe clean spills or messes immediately with a soft cloth dampened in water and a mild washing-up detergent or soap.
Safety & compliance
Assembly & documents
Assembly instructions
Advice & Care instructions
ENHET Door404.576.48ENHET Base cb f sink504.404.26ENHET Legs f cabinet104.490.18ENHET Supporting side panel/leg705.160.95FYNDIG Single-bowl inset sink902.021.26FYNDIG Single-bowl inset sink902.021.26FYNDIG Single-bowl inset sink902.021.26FYNDIG Single-bowl inset sink902.021.26GLYPEN Mixer tap304.423.65HEMTRÄSK Countertop205.161.11HEMTRÄSK Countertop205.161.11Technical information
GLYPEN
Mixer tap, stainless steel effect
Article number304.423.65| Brand Name | IKEA |
| Type of tap | Kitchen mixer tap |
| Max. flow rate at 3 bar | 5.7 l/min |
| Annual energy consumption | 498 kWh/p.a. |
| Recommended working pressure | 1 - 5 bar (0.1 - 0.5 MPa) (14.5 - 72.5 psi) |
| Min. working pressure | 0.5 bar (0,05MPa) (7.25 psi) |
| Max. static pressure | 10 bar (1,0MPa) (145.0 psi) |
| Max. worktop thickness | 50 mm (2") |
| Mounting hole measurement | 34-37 mm (1 3/8-1 7/16") |
| Connection hoses length | 450 mm (17 3/4") |
| Hose connection size | G 3/8" (R10) |
| Swivel spout | Swivel spout is preset to 360° but can be changed to 90° or 120°. |
| Recommended cold water temperature | 10-15˚C (50-59˚F) |
| Recommended hot water temperature | 60-65°C (140-150°F) |
| Max. hot water temperature | 80˚C (176˚F) |
| Strainer included | No |
| Third party certified according to local standards by | KIWA, PZH, BELGAQUA, SINTEF, ACS |
Measurements
- Width: 139 cm
- Depth: 63.5 cm
- Height: 90.5 cm
Packaging
ENHET
Article number404.576.48- Width: 60 cm
- Height: 2 cm
- Length: 81 cm
- Weight: 4.88 kg
- Package(s): 1
BILLSBRO
Article number203.343.14- Width: 12 cm
- Height: 2 cm
- Length: 18 cm
- Weight: 0.04 kg
- Package(s): 1
ENHET
Article number504.404.26- Width: 61 cm
- Height: 8 cm
- Length: 80 cm
- Weight: 12.92 kg
- Package(s): 1
ENHET
Article number104.490.18- Width: 10 cm
- Height: 6 cm
- Length: 18 cm
- Weight: 0.61 kg
- Package(s): 1
ENHET
Article number705.160.95- Width: 61 cm
- Height: 3 cm
- Length: 76 cm
- Weight: 2.45 kg
- Package(s): 1
FYNDIG
Article number902.021.26- Width: 44 cm
- Height: 18 cm
- Length: 50 cm
- Weight: 1.98 kg
- Package(s): 1
GLYPEN
Article number304.423.65- Width: 23 cm
- Height: 6 cm
- Length: 41 cm
- Weight: 1.27 kg
- Package(s): 1
HEMTRÄSK
Article number205.161.11- Width: 65 cm
- Height: 3 cm
- Length: 148 cm
- Weight: 16.92 kg
- Package(s): 1
LILLVIKEN
Article number103.115.39- Width: 41 cm
- Height: 9 cm
- Length: 45 cm
- Weight: 0.75 kg
- Package(s): 1