These insights convinced Daniel and his colleagues to focus on developing both closed cabinets which are more conventional, as well as open shelves in stable metal frames. "Whatever you put on the open shelves – porcelain, a fine olive oil or your most loved cookbooks – it becomes your personal and unique expression", says Daniel and explains how shelves and cabinets can be combined in many different ways to suit every kitchen. And when the needs change, it's easy to complete with more storage solutions.











ENHET Kitchen, anthracite/white, 243x63.5x241 cm
Must be completed with
How to get it
10 year guarantee
ENHET series makes it easy to start fresh with a new kitchen solution. This one offers a cosy breakfast nook and a strong personal expression with shelving and open space for a wall-mounted extractor hood.
Product details
Cabinet code ENHET K121
With white doors and drawer fronts you create a clean, bright and fresh expression that you can match with accents in all colours of the rainbow. Easy to enjoy and always in style.
The open wall frame makes good use of the space above the worktop. Perfect for hanging utensils, placing your tableware or other things you often use.
1 open base frame and a worktop is all you need to create a breakfast nook with room for seating. The shelves underneath can be used for toys, keeping them tucked away but within child’s reach.
The base cabinet with 3 drawers is handy for the smallest utensils to the largest pots. With drawers that pull out almost all the way, you get a good overview and easy access to the content.
Add organisers like cutlery trays, utensil trays and plate holders to organise and make efficient use of space inside cabinets and drawers, sold separately.
This kitchen is designed for portable induction hob and/or microwave combined with a wall-mounted extractor hood. Just unplug and stow the appliance when you need more space to prepare the food.
The open base frame offers shelf space for bowls and smaller appliances like toaster, mixer and rice cooker.
The wall-mounted extractor hood makes a big impact - both on the air quality and on the overall expression of your room. Sold separately.
ENHET swivel shelf gives you quick and easy access to smaller items like keys, vitamins or spice jars. It fastens easily to any of the open frames in the ENHET series.
ENHET hooks are perfect for hanging towels or SKATTÅN containers to store cutlery and utensils. The hooks slide easily into to the grooves under or on the side of the open ENHET frame.
You can easily add ENHET accessories to extend the use of your storage combination. And best of all – you don’t have to drill. Sold separately.
The unique wedge dowels make assembly easy and the fittings are nearly invisible.
The 12.5 cm high ENHET legs put the base cabinets at a comfortable height and increase the stability.
Make the look your own! Swap the colour of the open frames and the expression of the worktop and fronts to create a modern, classic, minimalist or colourful solution that suits your style perfectly.
BAGGANÄS knobs and handles have clean lines that create a modern expression. Available in black, brass and stainless steel, so you can choose the look that suits your taste and home best.
This slightly thicker worktop with rounded front edge fits perfectly in a traditional style kitchen. Just cut to the desired length and cover the edges with the 2 included edging strips.
FYNDIG sink in stainless steel, a hygienic, strong and durable material that's easy to keep clean.
The base cabinet for sink is a convenient place for your waste sorting and there’s space in the back of the cabinet for piping.
May be completed with HÅLLBAR waste sorting solution. With waste sorting under the sink, you can reduce spills that come from moving waste from sink to bin.
SKYDRAG lighting kit is designed for the ENHET series - perfect both as worktop lighting and to create ambience in the kitchen. With the TRÅDFRI driver and the wireless dimmer you can easily turn on, off and dim your lighting.
10 year guarantee. Read about the terms in the guarantee brochure.
H Preutz/A Fredriksson/IKEA of Sweden/IKEA of Sweden/E Lilja Löwenhielm/IKEA of Sweden/F Cayouette/Mikael Warnhammar
Good to know
Be aware that tools and preparation are required to cut the worktop to size and to cut holes for sink and tap to secure a perfect fit.
Must be secured to the wall for a safe installation. Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home, sold separately.
Screws for fixing the worktop to the base cabinet included.
Screws for connecting several base cabinets included.
The material in this product may be recyclable. Please check the recycling rules in your community and if recycling facilities exist in your area.
Appliances and lighting products are sold separately.
IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Materials & care
Material
- Side panel/ Bottom panel:
- Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Plastic foil, Plastic edging
- Back rail/ Filling:
- Particleboard, Plastic foil, Plastic edging
- Side panel:
- Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Plastic foil, Plastic edging
- Bottom panel/ Back rail:
- Particleboard, Plastic foil, Plastic edging
- Drawer:
- Steel, Epoxy/polyester powder coating
- Drawer bottom:
- Fibreboard, Plastic foil
- Tube:
- Steel, Powder coating
- Foot:
- Polypropylene plastic (min. 20% recycled)
- Plate:
- Steel, Powder coating, Galvanized steel
- Rivet:
- Steel, Epoxy/Acrylic coating
- Tube:
- Steel, Powder coating
- Insert nut:
- Steel, Epoxy/Acrylic coating
- Tubes:
- Steel, Powder coating
- Shelf:
- Galvanized steel, Powder coating
- Wedge:
- Steel, Epoxy/Acrylic coating
- Stainless steel, Powder coating
- Polypropylene plastic (min. 20% recycled)
- Tray:
- Galvanized steel, Powder coating
- Metal tube/ Top/ Bottom/ Lock:
- Steel, Powder coating
- Insert nut:
- Polyamide plastic, Copper
- Screw:
- Steel, Galvanized
- Top/ Bottom/ Nut:
- Stainless steel
- Basematerial:
- Particleboard
- Front side/ Backside:
- Plastic foil
- Edge:
- Plastic edging
- Particleboard, Laminate, Laminate, Unbleached paper
- Basematerial:
- Stainless steel
- Foam:
- Polyurethane plastic
- Tubes/ Cleaning plug:
- Polypropylene plastic
- Strainer/ Strainer basket:
- Stainless steel
- Seals:
- Synthetic rubber, Synthetic rubber
- Steel, Epoxy/polyester powder coating
- Body:
- Brass, Zinc, Metallized
- Spout:
- Brass, Metallized
Care
Wipe dry with a clean cloth.
Wipe dry with a clean cloth.
Wipe clean with a soft cloth dampened in water and a mild non-abrasive washing-up detergent or soap, if necessary.
Wipe dry with a clean cloth.
To prevent permanent stains on the worktop, wipe clean spills or messes immediately with a soft cloth dampened in water and a mild washing-up detergent or soap.
Do not use scouring-powder, steel wool, hard or sharp tools which can scratch the stainless steel surface.
Safety & compliance
Assembly & documents
Assembly instructions
Advice & Care instructions
ENHET Base cb f sink504.404.26ENHET Base cb w 3 drawers204.404.18ENHET Legs f cabinet904.490.19ENHET Legs f frame204.599.12ENHET Base fr w shelves104.489.76ENHET Base fr w shelves004.489.53ENHET Wall fr w shelves304.489.37ENHET Door904.521.63ENHET Drawer front504.521.60ENHET Drawer front804.521.68SÄLJAN Worktop804.392.09FYNDIG Single-bowl inset sink902.021.26FYNDIG Single-bowl inset sink902.021.26FYNDIG Single-bowl inset sink902.021.26FYNDIG Single-bowl inset sink902.021.26LAGAN Single-lever kitchen mixer tap100.850.27Technical information
LAGAN
Single-lever kitchen mixer tap, chrome-plated
Article number100.850.27| Brand Name | IKEA |
| Type of tap | Single-lever kitchen mixer tap |
| Max. flow rate at 3 bar | 8.0 l/min |
| Annual energy consumption | 698 kWh/p.a. |
| Recommended working pressure | 1 - 5 bar (0.1 - 0.5 MPa) (14.5 - 72.5 psi) |
| Min. working pressure | 0.5 bar (0,05MPa) (7.25 psi) |
| Max. static pressure | 10 bar (1,0MPa) (145.0 psi) |
| Max. worktop thickness | 50 mm (2") |
| Mounting hole measurement | 34-37 mm (1 3/8-1 7/16") |
| Connection hoses length | 425 mm (16 3/4") |
| Hose connection size | G 3/8" (R10) |
| Swivel spout | 360 ° |
| Recommended cold water temperature | 10-15˚C (50-59˚F) |
| Recommended hot water temperature | 60-65°C (140-150°F) |
| Max. hot water temperature | 80˚C (176˚F) |
| Strainer included | No |
| Third party certified according to local standards by | ETA-Danmark, KIWA, PZH, BELGAQUA, SINTEF, ACS |
Measurements
- Width: 243 cm
- Depth: 63.5 cm
- Height: 241 cm
Packaging
ENHET
Article number504.404.26- Width: 61 cm
- Height: 8 cm
- Length: 80 cm
- Weight: 12.92 kg
- Package(s): 1
ENHET
Article number204.404.18- Width: 61 cm
- Height: 10 cm
- Length: 80 cm
- Weight: 20.00 kg
- Package(s): 1
ENHET
Article number904.490.19- Width: 10 cm
- Height: 6 cm
- Length: 18 cm
- Weight: 0.61 kg
- Package(s): 2
ENHET
Article number204.599.12- Width: 7 cm
- Height: 4 cm
- Length: 21 cm
- Weight: 0.27 kg
- Package(s): 2
ENHET
Article number104.489.76- Width: 61 cm
- Height: 8 cm
- Length: 76 cm
- Weight: 11.25 kg
- Package(s): 1
ENHET
Article number004.489.53- Width: 61 cm
- Height: 6 cm
- Length: 76 cm
- Weight: 8.23 kg
- Package(s): 1
ENHET
Article number304.489.37- Width: 18 cm
- Height: 6 cm
- Length: 77 cm
- Weight: 4.31 kg
- Package(s): 2
ENHET
Article number604.657.51- Width: 7 cm
- Height: 1 cm
- Length: 10 cm
- Weight: 0.01 kg
- Package(s): 4
SKATTÅN
Article number304.657.57- Width: 12 cm
- Height: 12 cm
- Length: 34 cm
- Weight: 0.14 kg
- Package(s): 5
ENHET
Article number204.657.34- Width: 22 cm
- Height: 5 cm
- Length: 23 cm
- Weight: 0.87 kg
- Package(s): 1
ENHET
Article number904.521.63- Width: 60 cm
- Height: 2 cm
- Length: 81 cm
- Weight: 5.58 kg
- Package(s): 1
ENHET
Article number504.521.60- Width: 16 cm
- Height: 2 cm
- Length: 66 cm
- Weight: 1.20 kg
- Package(s): 1
ENHET
Article number804.521.68- Width: 31 cm
- Height: 4 cm
- Length: 66 cm
- Weight: 4.40 kg
- Package(s): 1
SÄLJAN
Article number804.392.09- Width: 65 cm
- Height: 4 cm
- Length: 255 cm
- Weight: 40.00 kg
- Package(s): 1
FYNDIG
Article number902.021.26- Width: 44 cm
- Height: 18 cm
- Length: 50 cm
- Weight: 1.98 kg
- Package(s): 1
LILLVIKEN
Article number103.115.39- Width: 41 cm
- Height: 9 cm
- Length: 45 cm
- Weight: 0.75 kg
- Package(s): 1
BAGGANÄS
Article number903.384.17- Width: 10 cm
- Height: 3 cm
- Length: 14 cm
- Weight: 0.07 kg
- Package(s): 2
LAGAN
Article number100.850.27- Width: 25 cm
- Height: 5 cm
- Length: 30 cm
- Weight: 1.02 kg
- Package(s): 1
Customise your ENHET kitchen
Want to customise the look and functionality for ENHET kitchen that suits your space, needs and taste?


A kitchen that is a little more you
All kinds of changes in life affect the home. Maybe you’ve become a devoted baker, started collecting unique porcelain or the family has grown with a baby. Whatever it is, the needs in the kitchen can suddenly change. With ENHET we wanted to create a more flexible kitchen series that you can easily customise and update as your everyday life changes – or when you just want to show a little more of your personality.
“We started by asking people around the world what their challenges look like in the kitchen,” says Daniel Loader, who worked with the development of ENHET. “Then we understood that the shortage of space and need for personalisation is universal.”
Celebrate the things you love
Less planning with a flexible kitchen
Flexibility is also the key word for several ENHET accessories, and Daniel has his favourite. "The hook rail. Here you can hang pots and pans, mugs, towels – pretty much anything you want to have close at hand when working in the kitchen. And you can easily move the hooks around without having to drill holes in the wall”, he says while putting up some hooks on the metal rail under a shelf. “Our goal with ENHET was to make it easy to end up with a more practical and personal kitchen. So you can plan less, and live more."
Material
What is particleboard?
Particleboard is made from recycled wood and sawmill leftovers – so wood pieces with the wrong shade, woodchips and sawdust become a resource instead of possibly being discarded. We use boards for things like bookcases, bed frames, sofas and kitchen frames. To protect from wear and moisture, we apply varnish, veneer or foil that adds to the furniture's look.
