Good to know

Materials and care

Material

Back and seat frame:: Plywood, Particleboard, Solid wood, Polyurethane foam 30 kg/cu.m., Polyurethane foam 20 kg/cu.m., Fibreboard, 100% recycled solid paperboard

Back cushion:: Highly resilient polyurethane foam (cold foam) 30 kg/cu.m., Highly resilient polyurethane foam (cold foam) 25 kg/cu.m., Polyurethane foam 30 kg/cu.m.

Zig-zag spring/ Bonell spring core:: Steel

Elastic webbing for back:: 70% polypropylene, 30% rubber

Bed mechanism/ Bracket:: Steel, Epoxy/polyester powder coating

Leg:: Solid oak, Clear acrylic lacquer

Fabric:: 78% cotton, 22 % polyester (100% recycled)

Care

Wet marks should always be dried off as soon as possible to stop moisture penetration.

Light stains can be removed with a sponge damped in water or a mild soapy solution.

Do not wash.

Do not bleach.

Do not tumble dry.

Do not iron.

Do not dryclean.

Safety and compliance

The cover has a lightfastness level of 5 (the ability to resist colour fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.This fabric's ability to resist abrasion has been tested to handle 30,000 cycles. A fabric that withstands 15,000 cycles or more is suitable for furniture that should withstand everyday use in the home.This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 110 kg.

Assembly and documents