PAX / TONSTAD Corner wardrobe, grey-beige/grey-beige oak veneer, 231/161x201 cm
How to get it
Checking availability...Collect 267 points with
It's OK to change your mind
A wardrobe fit for the one that loves folding! A lot of shelving space for most things that can be folded, rolled up or just does not fit in drawers.
Material
Wardrobe frameFibreboard, Particleboard, Paper foil
Add-on corner unit with 4 shelvesParticleboard, Fibreboard, Paper foil
Door- Door:
- Particleboard, Oak veneer, Clear acrylic lacquer
- Handle:
- Water-based glue, Adhesive
- Cover cap:
- Fibreboard, Clear acrylic lacquer
Soft closing hinge f corner section- Plastic parts:
- Acetal plastic
- Basematerial:
- Steel, Nickel-plated
Soft closing hinge- Basematerial:
- Steel, Nickel-plated
- Plastic parts:
- Acetal plastic
Clothes rail/ mesh basketSteel, Epoxy/polyester powder coating
Divider for frames- Partition:
- Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Paper foil, Plastic edging, Plastic edging
- Bottom panel:
- Particleboard, Paper foil
- Top panel:
- Particleboard, Paper foil, Plastic edging, Plastic edging
Drawer- Drawer front:
- Particleboard, Paper foil, Plastic edging, Plastic edging
- Drawer side/ Drawer back:
- Particleboard, Paper foil
- Drawer bottom:
- Fibreboard, Acrylic paint
Drawer with glass front- Drawer front:
- Fibreboard, Paper foil, Plastic edging, Plastic edging, Tempered glass
- Drawer side/ Drawer back:
- Particleboard, Paper foil
- Drawer bottom:
- Fibreboard, Acrylic paint
Glass shelf- Inside frame:
- Tempered glass
- Frame:
- Fibreboard, Paper foil
Insert for jewellery- Rail:
- Fibreboard, Paper foil
- Bottom panel:
- Fibreboard, Tinted clear lacquer
- User surface:
- 100% polyester (min. 70% recycled)
Insert with 4 compartments- Rail:
- Fibreboard, Paper foil
- Bottom panel:
- Fibreboard, Tinted clear lacquer
Pull-out rail for baskets- Basematerial:
- Steel, Pigmented epoxy/polyester powder coating
- Wheel:
- Acetal plastic
Pull-out tray- Drawer front/ Drawer side/ Drawer back:
- Fibreboard, Paper foil, Plastic edging
- Drawer bottom:
- Fibreboard, Paper foil
Pull-out trouser hanger- Frame:
- Fibreboard, Paper foil
- Clothes rail:
- Steel, Epoxy powder coating
ShelfParticleboard, Paper foil
Care
Wardrobe frame/drawer/insert with 4 compartments/mesh basket/pull-out rail for baskets/pull-out tray/pull-out trouser hanger/shelf/add-on corner unit with 4 shelves/soft closing hinge f corner section/soft closing hinge/clothes rail/divider for framesWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
Glass shelf/doorWipe dry with a clean cloth.
Assembly instructions
PAX Wardrobe frame904.582.02PAX Wardrobe frame904.582.16PAX Add-on corner unit with 4 shelves505.151.10PAX Add-on corner unit with 4 shelves505.151.10KOMPLEMENT Soft closing hinge f corner section103.684.89KOMPLEMENT Soft closing hinge002.145.05KOMPLEMENT Clothes rail302.568.91KOMPLEMENT Clothes rail902.568.93KOMPLEMENT Divider for frames105.091.06KOMPLEMENT Drawer505.090.72KOMPLEMENT Drawer605.090.76KOMPLEMENT Drawer with glass front505.090.86KOMPLEMENT Glass shelf005.091.16KOMPLEMENT Insert for jewellery304.040.28KOMPLEMENT Insert with 4 compartments704.040.26KOMPLEMENT Pull-out rail for baskets302.632.45KOMPLEMENT Pull-out tray805.090.99KOMPLEMENT Pull-out trouser hanger905.090.65
10 year guarantee. Read about the terms in the guarantee brochure.
You can easily adapt this ready-made PAX/KOMPLEMENT combination to suit your needs and taste using the PAX planning tool.
Adjustable feet make it possible to compensate any irregularities in the floor.
With the PAX Planner, you can easily complete your combination with integrated lighting. After choosing the light source, the planner will work out which accessories you need to complete the solution.
Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home, sold separately.
Two persons are needed for the assembly of this furniture.
The frame can be assembled in an upright position if your ceiling height is a minimum of 202 cm. Follow the assembly instructions in the package.
Min. ceiling height required: 205 cm.
The rubber gasket can be installed on either of the two doors in the corner solution, not necessarily on the frame/door it comes with in the package. Note – not to be installed on the door with a handle.
Interior accessories that help you organise inside your wardrobe are sold separately.
Knobs and handles are sold separately.
Hinges are needed for this product. They are included in the price but picked up separately.
The clothes rail holds about 30 shirts on hangers.
IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Material
Wardrobe frameFibreboard, Particleboard, Paper foil
Add-on corner unit with 4 shelvesParticleboard, Fibreboard, Paper foil
Door- Door:
- Particleboard, Oak veneer, Clear acrylic lacquer
- Handle:
- Water-based glue, Adhesive
- Cover cap:
- Fibreboard, Clear acrylic lacquer
Soft closing hinge f corner section- Plastic parts:
- Acetal plastic
- Basematerial:
- Steel, Nickel-plated
Soft closing hinge- Basematerial:
- Steel, Nickel-plated
- Plastic parts:
- Acetal plastic
Clothes rail/ mesh basketSteel, Epoxy/polyester powder coating
Divider for frames- Partition:
- Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Paper foil, Plastic edging, Plastic edging
- Bottom panel:
- Particleboard, Paper foil
- Top panel:
- Particleboard, Paper foil, Plastic edging, Plastic edging
Drawer- Drawer front:
- Particleboard, Paper foil, Plastic edging, Plastic edging
- Drawer side/ Drawer back:
- Particleboard, Paper foil
- Drawer bottom:
- Fibreboard, Acrylic paint
Drawer with glass front- Drawer front:
- Fibreboard, Paper foil, Plastic edging, Plastic edging, Tempered glass
- Drawer side/ Drawer back:
- Particleboard, Paper foil
- Drawer bottom:
- Fibreboard, Acrylic paint
Glass shelf- Inside frame:
- Tempered glass
- Frame:
- Fibreboard, Paper foil
Insert for jewellery- Rail:
- Fibreboard, Paper foil
- Bottom panel:
- Fibreboard, Tinted clear lacquer
- User surface:
- 100% polyester (min. 70% recycled)
Insert with 4 compartments- Rail:
- Fibreboard, Paper foil
- Bottom panel:
- Fibreboard, Tinted clear lacquer
Pull-out rail for baskets- Basematerial:
- Steel, Pigmented epoxy/polyester powder coating
- Wheel:
- Acetal plastic
Pull-out tray- Drawer front/ Drawer side/ Drawer back:
- Fibreboard, Paper foil, Plastic edging
- Drawer bottom:
- Fibreboard, Paper foil
Pull-out trouser hanger- Frame:
- Fibreboard, Paper foil
- Clothes rail:
- Steel, Epoxy powder coating
ShelfParticleboard, Paper foil
Care
Wardrobe frame/drawer/insert with 4 compartments/mesh basket/pull-out rail for baskets/pull-out tray/pull-out trouser hanger/shelf/add-on corner unit with 4 shelves/soft closing hinge f corner section/soft closing hinge/clothes rail/divider for framesWipe clean with a cloth dampened in a mild cleaner.
Wipe dry with a clean cloth.
Glass shelf/doorWipe dry with a clean cloth.
- WARNING! Tipping hazard – this product must be securely anchored. Use suitable screws and plugs for your home. If you are uncertain, seek professional advice.
Assembly instructions
PAX Wardrobe frame904.582.02PAX Wardrobe frame904.582.16PAX Add-on corner unit with 4 shelves505.151.10PAX Add-on corner unit with 4 shelves505.151.10KOMPLEMENT Soft closing hinge f corner section103.684.89KOMPLEMENT Soft closing hinge002.145.05KOMPLEMENT Clothes rail302.568.91KOMPLEMENT Clothes rail902.568.93KOMPLEMENT Divider for frames105.091.06KOMPLEMENT Drawer505.090.72KOMPLEMENT Drawer605.090.76KOMPLEMENT Drawer with glass front505.090.86KOMPLEMENT Glass shelf005.091.16KOMPLEMENT Insert for jewellery304.040.28KOMPLEMENT Insert with 4 compartments704.040.26KOMPLEMENT Pull-out rail for baskets302.632.45KOMPLEMENT Pull-out tray805.090.99KOMPLEMENT Pull-out trouser hanger905.090.65
This product is made up of more than one component. You can find the details of these components below.
