GLYPEN

Mixer tap, stainless steel effect

Product details

• Good to know

  If you are uncertain about the installation, contact a professional. The installation shall be made in accordance with valid local building and plumbing regulations.

  To be mounted in a 35 mm hole in a max. 50 mm thick sink/worktop.

  A tool is included that makes it easy to install the mixer tap in place.

  Water and energy saving aerator (5.7 l/min.) for high-pressure systems included.

  Connection hoses with 1/2" connection included. Connection length: 50 cm.

  Max. temperature hot water connection 80°C/176°F. Recommended temperature is 65°C/149°F.

  Spare parts are available to prolong the life of your product. For more information, contact IKEA Customer Services at your IKEA store or IKEA.com.

  Swivel spout is preset to 360° but can be changed to 90° or 120°.

  Fits IKEA wash-basins and standard wash-basins from other manufacturers.

• Materials and care

  Material

  Body:

  Zinc, Metallized

  Inner body:

  Reinforced polyamide plastic

  Spout:

  Brass, Metallized

  Care

  Do not use scouring-powder, steel wool, hard or sharp tools which can scratch the surface.

  Wipe clean with a soft cloth dampened in water and a mild washing-up detergent or soap, if necessary.

  Wipe dry with a clean cloth.

• Safety and compliance
  Tested and certified according to relevant mechanical, quality and safety standards.This tap is for use on high pressure water systems. Tested to work with a max. pressure of 10 bar (1000 kPa). Recommended working pressure range is 1.0 – 5.0 bar (100 kPa – 500 kPa).
• Assembly and documents

  Assembly instructions

  GLYPEN Mixer tap704.940.41

  Advice and care instructions

  GLYPEN Mixer tap704.940.41