How to get it
10 year guarantee
This mixer tap delivers an efficient water flow and when you lift the lever straight up only cold water is released instead of mixed hot and cold, helping you to use less hot water.
incl. VAT, plus Shipping costs for delivery or service costs at Click & CollectProduct details
The built-in pressure-compensating aerator keeps the water flow just right, helping to save water and energy.
The cold start function restricts opening the lever fully to the right. This means, when you lift the lever straight up, only cold water is released instead of mixed hot and cold.
Hot water is released by turning the lever to the left. It is only then that hot water is consumed.
Ceramic disc cartridge to ensure long-term drip-free operation.
10 year guarantee. Read about the terms in the guarantee brochure.
Mikael Axelsson
Technical information
BERGVATTNET
Wash-basin mixer tap
Article number805.907.49| Brand Name | IKEA |
| Type of tap | Wash-basin mixer tap |
| Max. flow rate at 3 bar | 5.7 l/min |
| Annual energy consumption | 343 kWh/p.a. |
| Recommended working pressure | 1 - 5 bar (0.1 - 0.5 MPa) (14.5 - 72.5 psi) |
| Min. working pressure | 0.5 bar (0,05MPa) (7.25 psi) |
| Max. static pressure | 10 bar (1,0MPa) (145.0 psi) |
| Max. countertop thickness | 50 mm (2") |
| Mounting hole measurement | 34-37 mm (1 3/8-1 7/16") |
| Connection hoses length | 450 mm (17 3/4") |
| Hose connection size | G 3/8" (R10) |
| Recommended cold water temperature | 10-15˚C (50-59˚F) |
| Recommended hot water temperature | 60-65°C (140-150°F) |
| Max. hot water temperature | 80˚C (176˚F) |
| Third party certified according to local standards by | KIWA, BELGAQUA, DVGW, PZH, SINTEF, ACS, ETA-Danmark |
Measurements
- Height: 12 cm
More bath, less room?
Plan your dream bathroom easily in 3D - with the help of our bathroom planner.
Designer thoughts
Designer thoughts
“When designing BERGVATTNET wash-basin mixer tap, we used the same water- and energy-efficient components found throughout our tap range. To keep costs down, we opted for a plastic casing. However, one challenge with this was the visible seam that forms where the two halves of the mould meet. We chose to incorporate this into the design, making it a sleek and striking feature. The result? A bold, high-quality tap that offers exceptional value for money!
Get the look
