ENHET / TVÄLLEN Open wash-stand with 2 shelves, anthracite/Glypen tap,
10 year guarantee
How to get it
ENHET series makes it easy to start fresh with a new bathroom solution. This one is perfect for the minimalist to prefers a clean and simple expression. Make it your own with your favourite frame colour.
Article Number494.245.35Product details
The open wash-basin frame gives easy access to towels and baskets and creates a more spacious feeling than closed storage.
Smooth, durable and easy-to-clean ceramic wash-basin with space for toothbrushes, soap dispenser and other smaller things on the wide back edge.
You save water and energy every time you lift the lever of the mixer tap thanks to the aerator device that prevents unnecessary use of water.
Legs are adjustable from 22-24.5 cm to compensate any irregularities in the floor.
Powder coated and galvanised steel withstands many years of use in environments exposed to water, splashes and humidity.
The unique wedge dowels make assembly easy and the fittings are nearly invisible.
ENHET hooks are perfect for hanging towels or accessories and slide easily into to the grooves under the open ENHET wall frame or on the side of the washbasin frame.
10 year guarantee. Read about the terms in the guarantee brochure.
Comprises: 1 base frame for wash-basin, 1 wash-basin, 1 mixer tap, 1 water trap and strainer, 4 legs and 2 hooks.
Mixer tap and strainer are included.
Secure that the material in your bathroom walls can support the weight of the furniture. If you are uncertain about the installation, contact a professional.
Two persons are needed for the assembly of this furniture.
Ceramic wash-basins are kiln-fired, which makes each one unique and the size may vary slightly from the measurements given.
Water-trap is included.
The material in this product may be recyclable. Please check the recycling rules in your community and if recycling facilities exist in your area.
- MaterialHook
- Stainless steel, Powder coating
Legs f frame- Tube:
- Steel, Powder coating
- Insert nut:
- Steel, Epoxy/Acrylic coating
Mixer tap- Body:
- Zinc, Metallized
- Inner body:
- Reinforced polyamide plastic
- Spout:
- Brass, Brass, Metallized
Water trap, 1 bowl- Water trap frame/ Cleaning plug/ Cover cap/ Outlet pipe/ Outlet connector:
- Polypropylene plastic
- Sealing ring/ Gasket/ Seal:
- Synthetic rubber
- Waste pipe:
- Polypropylene plastic, Synthetic rubber
- Strainer:
- Stainless steel
- Seals:
- Polyethylene foam
- Assembly tool:
- ABS plastic
Single wash-basin- Ceramics, Coloured glaze
Base frame for washbasinCare- Tubes:
- Steel, Powder coating
- Shelf:
- Galvanized steel, Powder coating
- Wedge:
- Steel, Epoxy/Acrylic coating
Base frame for washbasinWipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
Wet marks should always be dried off as soon as possible to stop moisture penetration.
Hook/legs f frameWipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
Mixer tapWipe dry with a clean cloth.
Single wash-basinWipe clean with a soft cloth dampened in water and a mild non-abrasive washing-up detergent or soap, if necessary.
Do not use scouring powder, steel wool, hard or sharp tools which can scratch the surface of the washbasin.
- This furniture must be fixed to the wall with the enclosed wall fastener.The washbasin is resistant to most chemicals, except for strong acids and strong alkalis.Must be secured to the wall for a safe installation. Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home, sold separately.
Technical Information
ENHET / TVÄLLEN
Open wash-stand with 2 shelves
| Type of mixer tap | Kitchen mixer tap |
| Applicable product standards | JIS S 3200-1, JIS S 3200-3, JIS S 3200-4, JIS S 3200-7 |
| Max. flow rate at 3 bar | 5.5 l/min (1.5 gpm) |
| Max. static pressure | 10 bar (145.0 psi) |
| Tested up to a max. static pressure | 16 bar (232.0 psi) |
| Min. working pressure | 0.5 bar (7.25 psi) |
| Recommended working pressure | 1-5 bar (14.5-72.5 psi) |
| Max. hot water temperature | 80˚C (176˚F) |
| Recommended hot water temperature | 60-65°C (140-150°F) |
| Recommended cold water temperature | 10-15˚C (50-59˚F) |
| Connection hoses length | 450 mm (17 3/4 '') |
| Hose connection size | G1/2" |
| Max. worktop thickness | 50 mm (2'') |
| Mounting hole measurement | 34-37 mm (1 3/8-1 7/16”) |
| Strainer included | No |
Measurements
Width: 64 cm
Wash-stand width: 60 cm
Depth: 43 cm
Height: 87 cm
- This product comes as 7 packages.ENHETArticle Number004.816.26
Width: 43 cm
Height: 6 cm
Length: 61 cm
Weight: 6.60 kg
Package(s): 1
ENHETArticle Number004.817.73Width: 7 cm
Height: 1 cm
Length: 10 cm
Weight: 0.01 kg
Package(s): 1
ENHETArticle Number604.815.67Width: 7 cm
Height: 4 cm
Length: 27 cm
Weight: 0.37 kg
Package(s): 2
RÄNNILENArticle Number704.224.12Width: 35 cm
Height: 8 cm
Length: 45 cm
Weight: 0.49 kg
Package(s): 1
GLYPENArticle Number904.423.91Width: 23 cm
Height: 6 cm
Length: 41 cm
Weight: 1.43 kg
Package(s): 1
TVÄLLENArticle Number904.816.36Width: 48 cm
Height: 20 cm
Length: 68 cm
Weight: 18.60 kg
Package(s): 1