The fabric gives very good protection against the sun’s UV rays as it has a UPF (Ultraviolet Protection Factor) rating of 25+, which means it blocks 96% of the ultraviolet radiation.
It’s easy to keep the canopy clean and fresh since you can easily remove and machine wash it.
The air vent reduces wind pressure and allows heat to circulate.
The hook-and-loop strap keeps the fabric in place when folded.
The parasol base will last longer and keep looking fresh, as it is both UV stabilised to withstand prolonged exposure to sunlight and fade resistant.
The parasol does not provide protection against reflected or scattered solar ultraviolet radiation.
Possible to separate for recycling or energy recovery if available in your community.
May be completed with TOSTERÖ parasol cover (220 cm).
Concrete, Tinted clear acrylic lacquer
Pole/ Rib/ Base:
Steel, Polyester powder coating
100% polyester (min. 90% recycled)
Parasol fabricParasol, hanging
Machine wash, max 40°C, normal process.
Do not bleach.
Tumble drying, low temperature (max 60°C).
Iron, max 110°C.
Do not dryclean.
Parasol base/parasol, hanging
The best way to extend the life of your parasol is by cleaning it regularly, protecting it with a cover whenever not in use and storing it in a cool, dry place indoors when the season is over.
Parasol, hanging with base
Wipe clean with a soft cloth dampened in water and a mild washing-up detergent or soap, if necessary.
At the end of the season, empty out the sand, clean the parasol base and store it in a cool, dry place.
Clean: With a mild soapy solution.
Always fold the parasol when not in use and never use it when it is windy.Each part of the parasol base must be completely filled with sand. Approximately 64 litres of sand are needed to fill all four parts, giving a total weight of about 90 kg.
The yarn in this product is dope-dyed, a colour method for synthetic fibres, which reduces consumption of water and dyestuff while improving colour fastness compared to traditional dyeing techniques.
By using recycled polyester in this product, we consume less new raw materials and lower our environmental impact while existing materials get new life.
We want to have a positive impact on the planet. That is why by 2030, we want all materials in our products to be recycled or renewable, and sourced in responsible ways.