TRIXIG

Hole repair filler, 150 ml

Product details

• Good to know

  Use by: Unopened – 3 years from the production date stated on the packaging. Opened – 12 months, provided that the container is closed properly.

  Storage temperature: not above 35ºC (+95ºF) and not below 5ºC (+41ºF).

  Dispose of the contents at a waste collection point or recycling centre in accordance with local or national regulations. Empty packaging can be disposed of with household waste according to local or national regulations.

  Paper tape, sandpaper and a spatula are needed for securing and preparing the surfaces before application and for smoothing them over afterwards.

  Apply another layer of filler if needed after 4 hours of drying time.

  To make the repaired surface stronger and more durable, paint, varnish or other coatings shall be applied over the filler. On filled outdoor surfaces these coatings should be approved for outdoor use.

  Drying time: 4-6 hours. Can be re-applied after 4 hours.

• Materials and care

  Material

  Cap:

  Polypropylene plastic, Polyethylene plastic

  Content:

  Limestone, Aqua, Acrylic polymer, Dispersing agent, Natural binders, Preservatives, Additives

  Body:

  Polyethylene plastic

• Safety and compliance
  Keep out of reach of children.Read all instructions on the packaging before using the product.Do not swallow.This product is not classified as hazardous according to regulation (EC) No 1272/2008.
• Assembly and documents

  Advice and care instructions

  TRIXIG Hole repair filler806.020.64