This integrated crushed marble wash-basin with sleek, modern design fits perfectly in our wash-stands. A flawless look and plenty of space in the back where you can place soap and toothbrush holder.
Material
Wash-basin- Basematerial:
- Polyester/crushed marble, Polyester
- Cover/ Spring:
- Stainless steel
- Cover cap/ Mechanism:
- Acetal plastic
- Sealing ring:
- Synthetic rubber
- Cover cap:
- Polycarbonate/ABS plastic
Water trap w flexible pipe, 1 bowl- Water trap frame/ Cleaning plug/ Cover cap/ Outlet pipe/ Outlet connector:
- Polypropylene plastic
- Sealing ring/ Gasket/ Seal:
- Synthetic rubber
- Waste pipe:
- Synthetic rubber, Polypropylene plastic
- Strainer:
- Stainless steel
- Seals:
- Polyethylene foam
- Assembly tool:
- ABS plastic
Care
Wash-basinWipe clean with a soft cloth dampened in water and a mild non-abrasive washing-up detergent or soap, if necessary.
Do not use scouring powder, steel wool, hard or sharp tools which can scratch the surface of the washbasin.
Assembly instructions
BACKSJÖN Wash-basin205.451.23RÄNNILEN Water trap w flexible pipe, 1 bowl205.545.32Advice and care instructions
BACKSJÖN Wash-basin205.451.23
Made of crushed marble which enables sharp, crisp edges with a scratch-resistant surface. This gives the wash-basin a clean and modern look.
Use the space on the wash-basin to place toothbrush holder and soap dispenser.
To enhance your style, pair with 2 mixer taps of your choice, sold separately.
10 year guarantee. Read about the terms in the guarantee brochure.
Comprises: 1 wash-basin and 1 water trap.
Chrome-finish wash-basin pop-up plug and overflow kit included.
If you are uncertain about the installation, contact a professional. The installation shall be made in accordance with valid local building and plumbing regulations.
Wash-basin mixer taps from our range and from other manufacturers can be mounted on this wash-basin.
Fits HAVBÄCK, ÄNGSJÖN, TÄNNFORSEN and HEMNES wash-stands.
Silicone is needed for installation, not included.
Waste outlet pipe diameter: 32 mm (1 1/4") / 40 mm (1 5/8").
IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Material
Wash-basin- Basematerial:
- Polyester/crushed marble, Polyester
- Cover/ Spring:
- Stainless steel
- Cover cap/ Mechanism:
- Acetal plastic
- Sealing ring:
- Synthetic rubber
- Cover cap:
- Polycarbonate/ABS plastic
Water trap w flexible pipe, 1 bowl- Water trap frame/ Cleaning plug/ Cover cap/ Outlet pipe/ Outlet connector:
- Polypropylene plastic
- Sealing ring/ Gasket/ Seal:
- Synthetic rubber
- Waste pipe:
- Synthetic rubber, Polypropylene plastic
- Strainer:
- Stainless steel
- Seals:
- Polyethylene foam
- Assembly tool:
- ABS plastic
Care
Wash-basinWipe clean with a soft cloth dampened in water and a mild non-abrasive washing-up detergent or soap, if necessary.
Do not use scouring powder, steel wool, hard or sharp tools which can scratch the surface of the washbasin.
- The washbasin should not come in contact with ammonia, acids, strong detergents, hair dye or chlorine.This product bears the CE mark.
Assembly instructions
BACKSJÖN Wash-basin205.451.23RÄNNILEN Water trap w flexible pipe, 1 bowl205.545.32Advice and care instructions
BACKSJÖN Wash-basin205.451.23
This product is made up of more than one component. You can find the details of these components below.
