ENHET Laundry, white/oak effect, 139x63.5x87.5 cm
How to get it
10 year guarantee
Cabinets with doors give this small-size solution a uniform look. The countertop is perfect for folding and stacking laundry and the space underneath is ideal for whatever you need to store.
Product details
Cabinet code ENHET L108
The base cabinet is perfect for bulkier detergent and cleaning buckets while often-used items are kept handy in the wall cabinets. Doors on all cabinets create a tidy and harmonious expression.
A sink in the laundry area is convenient for washing clothes by hand or filling/emptying cleaning buckets and there’s spacious storage for bulkier items in the cabinet underneath.
The countertop is suitable for use in wet or humid spaces which makes this solution a good option if you are creating a laundry area in your bathroom.
Add ENHET hooks to the supporting side panel to hang towels or create more storage space with SKATTÅN containers. Sold separately.
Good sense and feel in beautiful partnership. The foil surface resists moisture, scratches and bumps, while the wood pattern creates a lively and warm expression.
10 year guarantee. Read about the terms in the guarantee brochure.
Good to know
Appliances and lighting products are sold separately.
Be aware that tools and preparation are required to cut holes for sink and tap to secure a perfect fit.
The countertop is pre-cut to measure 139 cm. May not be cut.
Cabinet, supporting side panel/leg, leg, countertop, sink, sink stopper with strainer, tap and knob/handle included.
Materials and care
Material
- Basematerial:
- Particleboard
- Front side/ Backside:
- Plastic foil
- Edge:
- Plastic edging
- Particleboard, Plastic foil, Plastic edging
- Tube:
- Steel, Powder coating
- Foot:
- Polypropylene plastic (min. 20% recycled)
- Plate:
- Steel, Powder coating, Galvanized steel
- Rivet:
- Steel, Epoxy/Acrylic coating
- Tubes:
- Steel, Powder coating
- Wedge:
- Steel, Epoxy/Acrylic coating
- Side panel/ Bottom panel/ Top panel/ Shelf:
- Particleboard, Plastic foil, Plastic edging
- Back panel:
- Fibreboard, Plastic foil
- Body:
- Zinc, Metallized
- Inner body:
- Reinforced polyamide plastic
- Spout:
- Brass, Metallized
- Polypropylene plastic
- Particleboard, High-pressure melamine laminate, Laminate
- Funnel:
- Polypropylene plastic
- Strainer/ Strainer basket:
- Stainless steel
- Seals:
- Synthetic rubber
- Body/ Body:
- Stainless steel
- Foam/ Foam:
- Polyurethane plastic
- Support panel/ Support panel:
- Polypropylene plastic
Care
Wipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
Wet marks should always be dried off as soon as possible to stop moisture penetration.
Wipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
Wipe dry with a clean cloth.
Laminate is sensitive to corrosive chemicals like descaling agents, chlorine or acetone. Remove immediately in case of spillage. Regular household detergents may be used.
To prevent permanent stains on the worktop, wipe clean spills or messes immediately with a soft cloth dampened in water and a mild washing-up detergent or soap.
Wipe dry with a clean cloth.
Safety and compliance
Assembly and documents
Assembly instructions
Advice and care instructions
ENHET Base cb f sink204.405.74ENHET Legs f cabinet204.816.30ENHET Supporting side panel/leg305.160.97ENHET Wall cb w 2 shelves304.406.01GLYPEN Kitchen mixer tap804.423.77HEMTRÄSK Countertop605.161.14HEMTRÄSK Countertop605.161.14LÅNGUDDEN Inset sink, 1 bowl703.249.73LÅNGUDDEN Inset sink, 1 bowl703.249.73Technical Information
GLYPEN
Kitchen mixer tap, stainless steel effect
Article Number804.423.77| Type of tap | Kitchen mixer tap |
| WELS rating | 6 stars |
| Max. flow rate at 3 bar | 5.7 l/min (1.5 gpm) |
| Recommended working pressure | 1 - 5 bar (0.1 - 0.5 MPa) (14.5 - 72.5 psi) |
| Min. working pressure | 0.5 bar (0,05MPa) (7.25 psi) |
| Max. static pressure | 10 bar (1,0MPa) (145.0 psi) |
| Max. countertop thickness | 50 mm (2") |
| Mounting hole measurement | 34-37 mm (1 3/8-1 7/16") |
| Connection hoses length | 425 mm (16 3/4") |
| Hose connection size | G 1/2" (R15) " |
| Swivel spout | Swivel spout is preset to 360° but can be changed to 90° or 120°. |
| Recommended cold water temperature | 10-15˚C (50-59˚F) |
| Recommended hot water temperature | 60-65°C (140-150°F) |
| Max. hot water temperature | 80˚C (176˚F) |
| Third party certified according to local standards by | IAPMO OCEANA |
Measurements
- Length: 139 cm
- Depth: 63.5 cm
- Height: 87.5 cm
Packaging
ENHET
Article Number504.815.58- Width: 60 cm
- Height: 2 cm
- Length: 81 cm
- Weight: 4.20 kg
- Package(s): 3
ENHET
Article Number204.405.74- Width: 61 cm
- Height: 8 cm
- Length: 80 cm
- Weight: 17.56 kg
- Package(s): 1
ENHET
Article Number204.816.30- Width: 10 cm
- Height: 6 cm
- Length: 18 cm
- Weight: 0.61 kg
- Package(s): 1
ENHET
Article Number305.160.97- Width: 61 cm
- Height: 3 cm
- Length: 76 cm
- Weight: 2.45 kg
- Package(s): 1
ENHET
Article Number304.406.01- Width: 31 cm
- Height: 12 cm
- Length: 80 cm
- Weight: 16.20 kg
- Package(s): 2
GLYPEN
Article Number804.423.77- Width: 23 cm
- Height: 6 cm
- Length: 41 cm
- Weight: 1.28 kg
- Package(s): 1
GUBBARP
Article Number303.364.35- Width: 6 cm
- Height: 3 cm
- Length: 6 cm
- Weight: 0.03 kg
- Package(s): 2
HEMTRÄSK
Article Number605.161.14- Width: 65 cm
- Height: 3 cm
- Length: 148 cm
- Weight: 16.92 kg
- Package(s): 1
LILLVIKEN
Article Number703.254.25- Length: 7 cm
- Weight: 0.24 kg
- Diameter: 12 cm
- Package(s): 1
LÅNGUDDEN
Article Number703.249.73- Width: 51 cm
- Height: 24 cm
- Length: 51 cm
- Weight: 3.35 kg
- Package(s): 1