BROGRUND Wash-basin mixer tap with sensor, chrome-plated
BROGRUND Wash-basin mixer tap with sensor, chrome-plated
BROGRUND Wash-basin mixer tap with sensor, chrome-plated
BROGRUND Wash-basin mixer tap with sensor, chrome-plated
BROGRUND Wash-basin mixer tap with sensor, chrome-plated

Like magic, the water turns on at the slightest hand movement in front of the tap, at a pre-set temperature. A clean and simple design that’s hygienic too, since you don’t need to touch the tap.

Article number004.233.54

Product details

10 year guarantee. Read about the terms in the guarantee brochure.An aerator integrated in the tap keeps the water flow just right while less water and energy is used.Water and energy saving aerator (5.7 l/min.) for high-pressure systems included.A tool is included that makes it easy to install the mixer tap in place.Connection hoses with 3/8" connection included. Connection length: 35 cm.Connection hoses with 3/8" connection included. Connection length: 50 cm.4 batteries (LR6 AA 1.5V) included.Tested and certified to relevant European mechanical, quality, safety and hygienic standards, including KIWA.This tap is for use on high pressure water systems. Tested to work with a max. pressure of 10 bar (1000 kPa). Recommended working pressure range is 1.0 – 5.0 bar (100 kPa – 500 kPa).Max. temperature hot water system 80°C/176°F.Spare parts are available to prolong the life of your product. For more information, contact IKEA Customer Services at your IKEA store or batteries are available in most stores where alkaline batteries are sold.If you are uncertain about the installation, contact a professional. The installation shall be made in accordance with valid local building and plumbing regulations.Fits IKEA wash-basins and standard wash-basins from other manufacturers.The water turns on automatically when the sensor detects your hands or an object in front of it, and turns off automatically 2 seconds after removing them.The water temperature is controlled using the lever on the side of the mixer tap.Designer

H Preutz/N Karlsson

Article number004.233.54



Wash-basin mixer tap with sensor

Type of mixer tapWash-basin mixer tap with sensor
Applicable product standardsEN 817
Max. flow rate at 3 bar5.5 l/min (1.5 gpm)
Max. static pressure10 bar (145.0 psi)
Tested up to a max. static pressure16 bar (232.0 psi)
Min. working pressure1 bar (14.5 psi)
Recommended working pressure1-5 bar (14.5-72.5 psi)
Max. hot water temperature80˚C (176˚F)
Recommended hot water temperature60-65°C (140-150°F)
Recommended cold water temperature10-15˚C (50-59˚F)
Connection hoses length450 mm (17 3/4 '')
Hose connection sizeG3/8” (R10)
Max. countertop thickness50 mm (2'')
Mounting hole measurement34-37 mm (1 3/8-1 7/16”)
Noise levelI
Battery typeAA
Amount of batteries4pcs

Product size

13 cm

SustainabilityPeople and planet

Energy and resources

Hygienic and convenient - Magic at the slightest movement of the hand

Morning rush hour can get a bit messy with all the activities around the wash-basin, which is sometimes shared by several people. BROGRUND wash-basin mixer tap with sensor makes things easier and more hygienic since the water turns on with a slight hand movement and then turns off automatically – without touching the mixer tap. No more puddles of water on or around the tap from wet hands – and the temperature is conveniently pre-set using the small lever on the side.

BROGRUND Wash-basin mixer tap with sensor, chrome-plated

Water-conscious commitment in bathrooms

Every time you brush your teeth, wash your hands, shave or take a bath, you can help with something essential – saving water. That’s why all our taps have an aerator that saves water and energy while keeping the water stream just right. But that’s just a small part of a bigger effort: conserving more clean water than we use.

Antony Smith, an engineer from England, remembers when he joined IKEA and the small team that develops our taps and showers. "I realized we practice what we preach about sustainability," Antony says. "It's a refreshing experience, but it makes our job really difficult because we genuinely have to deliver on sustainability with each product."

Water is precious, but often taken for granted

So, why conserving water? Because no organism on earth can survive without it, and no new water is created. It's constantly recycled, but our freshwater supply is overused and not evenly distributed. It’s impacted by pollution, contamination and climate change, too. "Those of us who live where you can just turn on your tap may not think about saving water; it's taken for granted," Antony says.

Thinking about water at every step

Behind the scenes, we constantly explore new ways to improve water efficiency. That includes providing factory workers and their families with fresh drinking water, ensuring all factory water is cleaned before release, reducing water usage in textile production and using rainwater to flush toilets in stores. And now we are working on new taps using sensors and spray technology – and new water-efficient showers – to save even more. Every water-saving action adds up.

Read MoreRead less


What are zinc and zamak?

Zinc is a metallic element while zamak is a mixture of zinc, aluminium, magnesium and copper. Both are durable materials and easy to cast into different shapes. They are good at conducting heat and electricity. Objects made of zinc or zamak are often given a surface treatment to resemble metals like gold, brass or stainless steel. Both zinc and zamak retain their good properties when they are recycled to become new objects.

Wash-basin mixer tap with sensor, chrome-plated

Price incl. VAT
Dhs 450
See delivery options at checkout
See options at checkout
Checking stock
BROGRUND Wash-basin mixer tap with sensor, chrome-plated


Dhs 450