Goodbye noise from outside
WHAT YOU NEED:
Two pieces of metre fabric (any you like) of the same size, enough to fit your window
A piece of wadding (that stuff from inside a synthetic quilt), that’s 2cm narrower and 2cm shorter than the metre fabric
Two eyelets (to hang it up)
A tape measure
A sewing maching
Some dressmakers’ chalk
1. LAYER UP
Place the wadding in between the two pieces of metre fabric with a 1cm gap, on all sides, between the edge of the wadding and the edge of the metre fabric.
2. FOLD AND PIN
Fold the edges of the metre fabric inwards to create a hem and pin in place.
3. SEW THE BORDER
Sew the two sides together with the wadding inside, removing the pins as you go.
4. MARK OUT A LATTICE
So the wadding stays equally distributed, you need to sew a lattice design into the curtain. Start by marking out equal squares using the tape measure and dressmakers’ chalk. (The size of these vary depending on the size of your curtain. Just make sure they’re all of equal size.)
5. SEW THE LATTICE IN PLACE
Sew the lattice design into the curtain. Use double lines to ensure the wadding stays in place. Rub away the chalk when you’re done.
6. PUT IN THE EYELETS
Put in a couple of eyelets in the top corners, so you can easily hang your curtain from hooks in the wall. First cut out a circular shape the same size as the eyelet. Then push the eyelet in place. It should be a snug fit.
Goodbye noise from inside
What you need (to make one. To cover the wall you’ll need more of course):
- A picture frame in a size of your choice (we used 40cm x 50cm)
- Some wadding, 2cm narrower and 2cm shorter than the picture frame
- A piece of metre fabric (in a colour you love) that’s 10cm wider and 10cm longer than the picture frame
1. Layer up
Layer the wadding on top of the metre fabric. Then place the back of the picture frame on top of the wadding.
2. FOLD AND TAPE
Fold the corners of the metre fabric over the back of the frame and tape in place.
3. REMOVE THE PLASTIC
Remove the plastic (or glass) from the picture frame.
4. PUT IT ALL TOGETHER
Put the back of the picture frame, with the wadding and metre fabric attached, into the front of the frame and secure it in place with the little clips.
... AND YOU’RE DONE
You now have one soundproof frame ready to attach to the wall.